Since im going to TII on my TI car, dose my TI already have a CAT sensor? my TII intake dosent have one, so I was wondering if I already do on my TI so I can reuse it?
Since im going to TII on my TI car, dose my TI already have a CAT sensor? my TII intake dosent have one, so I was wondering if I already do on my TI so I can reuse it?
Yes, your 87 TI has a charge temp sensor. You will need to drill and tap a hole in your new intake for it, but thats super easy. Also, I forgot to mention in the PM I sent you that I have a spare set of 33 pph injectors I could sell you for an extra $15 on top of the computer calibration. The charge temp sensor is mounted on the top-middle of the intake manifold on your New Yorker.
84 Laser XE TII A555 89 Caravan SE TIV A568
Do you need some extra logic module pins , or the 4 wire AIS plug I have those as well.
84 Laser XE TII A555 89 Caravan SE TIV A568
I picked up a 4 wire AIS from a Neon I was told that will work. The pins tho I think I will need to run the two extra wires for the AIS. The Inj. I guess I will need. unless there is a year of car I can just go to the Junk Yard and get them from??
Any 89 up turbo car will have 33pph injectors.
84 Laser XE TII A555 89 Caravan SE TIV A568
I just wrote an article for the Knowledge Center (http://www.turbo-mopar.com/forums/vb...&articleid=150) with instructions and pictures on how to install those pins. It's not difficult at all.
Ok cool thanks man.
87 I have a real t2 intake manifold that's already drilled for your cat sensor you can have if you want it. Maybe we should meet up and I can explain things to ya.
That would be sweet!! When can we meet up??
Fyi the intake temp sensor will thread right into the stock hole on the front of a 1pc intake manifold. Then you can get a fitting with more than one bung on it for the rear hole off of several other kinds of dodges (i have 3.3 donors so ive been using fittings off those intakes) and run the vacuum stuff off the back. No drilling if done this way!
yea but that fitting has one big and 1 small nipple right? If the intake is off then drilling is simple. i have a intake that's drilled he can just have and he's like 15 minutes from me.
Cool deal, I will take that intake, and that way I can get alot of answers in person and better understand some stuff. just PM me when we can meet up.
Always cool to help out the new guys That's TM community spirit
I'll be going to P&S tomorrow about 430 with a buddy. If ya can't make that then maybe next sunday sometime afternoon.