Hi, I have a FM Enforcer 2 turbo, the fitting for the oil feed is different than on a stock turbo. It has male fitting on the center cartridge, I'm wondering if anyone else has this turbo and if the Turbos Unleashed braided line would work with this style fitting, or do I have to get one custom made? thanx
Jon
check out the turbo insall on my site.
You may have a filter extension on the turbo oil inlet. Turbonetics usually includes them to reduce oil contamination failures. See attached photo of Turbonetics oil filter.Originally Posted by Evilancer
Chris-TU
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
Your stock oil line should fit into it or the old fitting should screw into this one. Also, make sure you reseal the part Chris showed you. When I installed my turbo, that fitting was installed loosely and it was DRY, no thread sealant on it at all.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Yes, our braided steel oil supply line will fit with this filter.
Chris-TU
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
[IMG]C:\WINDOWS\Desktop[/IMG]
Chris, the picture you posted of the filter is not what is on the center section of my turbo, basically it only has the threaded brass part on the turbo, not the upper half like the picture you posted.
Jon
I have a picture but I can't seem to post it?
Jon
Posting Permissions
Reply With Quote