L-Body wheel arches

[Dominic]

Hey All......

Trying to get some work done on the ol' Omni and was curious about one thing.....Are the wheel arches (openings) the same front to back???

Gots some bad rust, and need to know if I can cut the required section from a spare fender to repair my damage on the rear.

Thanks in advance,

Dom

[spoolinhard]

Hey All......

Trying to get some work done on the ol' Omni and was curious about one thing.....Are the wheel arches (openings) the same front to back???

Gots some bad rust, and need to know if I can cut the required section from a spare fender to repair my damage on the rear.

Thanks in advance,

Dom

I believe they are. They are reversed to my knowledge, you might want to check first. Ex. the pass front would be the same as the drivers rear.

[rich tideswell]

I believe they are. They are reversed to my knowledge, you might want to check first. Ex. the pass front would be the same as the drivers rear.

x2 on that logic thinking. was considering doing this to my daytona

[Dominic]

Great,

Thanks guys!!