Results 1 to 7 of 7

Thread: carlisle parts teaser

  1. #1
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,966

    carlisle parts teaser

    Just about done loading the trailer for carlisle
    I'm not going to have time to get back on the computer later
    so if you see something you want
    I'll be in spots P207-P210 along the fence behind the car corral

    T3 60,000 mile turbo and exhaust manifold
    t3 spirit downpipe and high flow cat
    r/t abs and proportioning valve
    r/t springs and front struts
    MP rear g,j,p lowering springs used

    new t3/t4 turbo with elbow welded on
    t3/t4OB god core
    good TII glhs turbo on manifold 69,000 miles from Gary Donovan
    good TI
    many wastegate cans , adj. , large, TII

    TII intake complete
    895 injectors less then 100 miles
    CB Performance wastegate, 5 trips down the track
    XS power I/C
    alumn. VW radiator

    '87 glhs computer
    '89 TI 2.5 auto smec
    '91 3.0 auto sbec
    5234655 smec
    5225137 smec

    MP NOS L-body shocks/struts
    used glhs rear konis w/springs
    used L-struts 1"mp lowering springs, rear HD cargo springs
    NOS Gas Plus struts (3) sets E,G,K,S 84-86
    misc. springs and ebay coilovers
    Glhs fast ratio rack

    Rear SC Blue seat very nice
    Red omni front and rear seats
    Red omni door panels
    red omni headliner

    many misc. L- interior pieces too many too list
    tow dolly lights, spare tire braket and license plate holderw/light

    L-body 555 conversion
    525 cable shift braket (great for L-bodies wanting cable shift without swapping trans.)
    many shifters and cables
    clutch cables, pedals , throttle cables

    grey porthole wheels
    6.5" wide crab wheels w/tires (2) good snows !

    getting the idea yet lots and lots and lots of parts

    and of course I'll have the vac. blocks and flanges
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  2. #2
    Hybrid booster
    Join Date
    Jun 2008
    Location
    Kenilworth, NJ
    Posts
    936

    Re: carlisle parts teaser

    would've been nice to see this under the for sale section.
    Sorry I missed it...

  3. #3
    boostaholic
    Join Date
    Dec 2005
    Location
    Rhode Island
    Posts
    1,250

    Re: carlisle parts teaser

    You came in a big trailer right? Trying to remember who you are.
    Pete Faggella 03 PT Cruiser, 2.4L N/A 5 speed. Daily driver. All stock with baby moon wheels. 85 LeBaron 2.2TBI auto. Hoped I'd see a difference with bumped compression, but I didn't. Still slow. "Life should not be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming "Wow! What a Ride!'"

  4. #4
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,966

    Re: carlisle parts teaser

    yeah 28' black inclosed trailer down in the hole
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  5. #5
    Invisible Turbo Mopar Contributor mcsvt's Avatar
    Join Date
    Dec 2005
    Location
    Poughkeepsie, NY
    Posts
    3,518

    Re: carlisle parts teaser

    Bruce if you still have that flywheel when the next DV meeting comes around I'll take it off your hands. If you sell it before hand no worries (hell it could be gone already for all I know )
    -Gary Mazzone-
    1986 GLHS #168

  6. #6
    Supporting Member Turbo Mopar Contributor turbo84voyager's Avatar
    Join Date
    Jul 2008
    Location
    Nanticoke PA
    Posts
    805

    Re: carlisle parts teaser

    Those vac blocks are very nice. I wish you were making them before I spent more for a block with out the fittings
    Justin
    84 Plymouth Voyager LE 2.5 Intercooled Turbo 5-spd - Only 84 Turbo Van!
    89 Dodge Caravan ES 2.4 SRT-4 Intercooled Turbo (46 trim, OS Valves, CP Pistons, Eagle Rods, NPR IC) Built 31th trans
    91 Dodge Shadow Convertible 2.5 Intercooled Turbo A555 5-spd
    01 Pontiac Grand Prix GTP - 3.8 supercharged! Only 5K miles....
    01 Subaru Forester - Daily Driver
    07 Yamaha FJR 1300 140+ HP on 2 wheels
    85 Honda Nighthawk 450
    94 Bobcat 763 Skidloader 2.2 Kubota Diesel
    SV-SDAC Member

  7. #7
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,966

    Re: carlisle parts teaser

    Quote Originally Posted by mcsvt View Post
    Bruce if you still have that flywheel when the next DV meeting comes around I'll take it off your hands. If you sell it before hand no worries (hell it could be gone already for all I know )
    that's cool
    I'll hold it for you
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

Similar Threads

  1. General Cleaning out Garage (L-body/GLHS SC parts)
    By 1983Rampage in forum Parts For Sale
    Replies: 37
    Last Post: 08-01-2008, 04:27 PM
  2. Do you want to sell some parts at Carlisle this year?
    By 86tona in forum General Vendor Area
    Replies: 0
    Last Post: 06-18-2008, 03:02 PM
  3. 523/543/568 Minivan 5spd conversion parts.
    By inmyshadow in forum Parts For Sale
    Replies: 14
    Last Post: 12-23-2007, 05:19 PM
  4. carlisle BRING CASH !!!!!!!!!!! cheap parts
    By "Top Fuel" Bender in forum Parts For Sale
    Replies: 19
    Last Post: 07-10-2007, 10:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •