so im doing a big brake conversion on my shelby charger and i need the bracket where the hard line goes to a soft line on the rear suspension. and whatever should go with it if anything. just cut it off as low as possible so i have room to work with
so im doing a big brake conversion on my shelby charger and i need the bracket where the hard line goes to a soft line on the rear suspension. and whatever should go with it if anything. just cut it off as low as possible so i have room to work with
Is it for the vented or non vented setup (or does it matter?)
shouldnt matter since it doesnt actually do anything other than hold the soft line in place.Originally Posted by W.P._Turbocars
do you understand which piece im talking about.
are you looking for the piece actually on the axle near the caliper?i may have that if it is.
its the piece that holds where the rubber hose and hard line meet
on the axle i have it is a bolt on piece from what i can tell.here is a pic.if so i have both.
the car i got it off of might not have been bolt on but yes that is what i need. what it the shape of the hole where the brake line goes in?on the axle i have it is a bolt on piece from what i can tell.here is a pic.if so i have both.
bump for what he has pictured
to the top
[QUOTE=boostinfreak;521257]on the axle i have it is a bolt on piece from what i can tell.here is a pic.if so i have both.
can i buy that
u still need this stuf?? im in the middle of a conversion too. havent gotten around to install yet.
BUT i have them exact pieces dude just showed u pics of
aaaaand i have another style that looks completely different. how much of a hurry r u in for these things? i can send u the ones i dont happen to use, at not charge but shipping. i just havent asssembled things to actually see what ill be using. i have all SS brake lines on the rear axle (hard and flex lines). just need to get it all in order and see what bracket will work best for myself.
i need them pretty soon since i need to get the swingarm blasted and prepped for welding and i need those to go with it.
can i get a pic of those other ones? and do they have the same shaped hole in them for the rear lines?
still need this part
thje other ones are alot bigger, its like a big C kind of, and i thought there was a nut on the bracket too, so it could be screwed into the rear axle
ill get pics of them all, but as i mentioned earlier im still unsure of what brackets ill be using, and when ill be getting around to it!
it doesnt matter to me how big the bracket is just as long as the hole where the line goes in is the same. it is gonna be welded on anyway so if its to big i will just cut it.
I'll recheck tomorrow when I go out to the shop. If I have one, how's 7 shipped?
good. u take paypal?
still looking
i will have to pull of the line to find out what shape the hole is...
to the top
Reply With Quote
