this is continued from my last posting since i've fixed a few problems i think it needed another title...
So i borrowed a timing light and got it set perfectly at 12 degrees ...as well as checked my cam timing with the light as well...
OH, i found that a tps wire had partially pushed itself out when i pushed the connector on, so thats fixed
It still wants to stall out under a load!!!!!!!
Its burning very rich with lots of white smoke and has a surging idle. I'm sure there are no vacuum leaks...
I REALLY REALLY need to figure this out in the next day or 2 or other wise i'm going to have to be taking an hour and a half long bus ride 2 times a day to and from work
What else do i need to check?!?!?!?!?!