Page 19 of 19 FirstFirst ... 91516171819
Results 361 to 368 of 368

Thread: Turbonator SBEC Codebase

  1. #361
    turbo addict
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,581

    Re: Turbonator SBEC Codebase

    Quote Originally Posted by 1BADVAN View Post
    I have tried all this and no luck, sometimes it cuts out so bad it will stop revving at 4500 like a hard limiter, put the stock ecu in and it runs perfect. Here is a link to my cal, if anyone has any ideas i would appreciate it. https://drive.google.com/open?id=0B6...FhvVlExanlnQUE
    Just to add info if it helps, I tried every single 2.5 template there was and every combination of unchecked antilag and launch control and the results never changed. Maybe the MP one cut out a little softer. I even set all the launch control and antilag to max RPM and 0 degrees of timing. Always acts up at 3800 RPM. Seems like an antilag because reving in Park you can hear the turbo spooling up when it happens.

    Burned a stock Cal and works perfectly. Maybe someone has a known working 2.5 TSBEC Cal they can post I could try? Maybe an older version of TSBEC?

    Edit: I tried a Tsbec version 3 and is working good so far.
    Last edited by 1BADVAN; 10-16-2016 at 05:49 PM.

  2. #362
    Mitsu booster
    Join Date
    Sep 2015
    Location
    Pasco Wa
    Posts
    17

    Re: Turbonator SBEC Codebase

    I had the very same problem back in January with the v4 and v4.1 2.2 TSBEC Cal and ended up using the v3 Cal also. It would start to miss fire around 2500 rpms and wouldn't go above 5000rpms. I could verify it with a timing light, the timing would start jumping erratically and even seemed to intermittently loose spark.

    I'd like to be able to use the v4.1 cal someday as it has some nice features the v3 doesn't.

  3. #363
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,895

    Re: Turbonator SBEC Codebase

    Quote Originally Posted by 1BADVAN View Post
    ....

    Edit: I tried a Tsbec version 3 and is working good so far.
    would you zip up that version 3 tsbec and send it to me. thx.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  4. #364
    turbo addict
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,581

    Re: Turbonator SBEC Codebase

    Quote Originally Posted by wowzer View Post
    would you zip up that version 3 tsbec and send it to me. thx.
    I added it to this folder
    https://drive.google.com/file/d/0B6S...p=docslist_api

  5. #365
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,895

    Re: Turbonator SBEC Codebase

    thanks.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  6. #366
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,530

    Re: Turbonator SBEC Codebase

    I have a car I can't get this to work in. It's a factory VNT car but doesn't have the VNT stuff anymore. Has a cal from FWD-P in it that runs it that is supposed to be a modified VNT cal. I have tried both a VNT Daytona and a regular SBEC Turbonator, and neither will start or run the car. Tried 3 different chips. Anyone else having trouble with getting T-SBEC to work?
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  7. #367
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Oct 2010
    Location
    Massachusetts
    Posts
    131

    Re: Turbonator SBEC Codebase

    This seems to be the best place to put a summary that might be able to save search time for anyone currently getting into T-SBEC.

    V4.1 in the download on the first page seems to have some bugs that will cause misses. V3 files don't seem to experience these issues, but may experience an issue every ~8.1 miles connected to the EMR routine. This can be resolved as posted here: http://www.turbo-mopar.com/forums/sh...=1#post1139287

    There is a link a few posts above to the V3 files.

    In a search, I found that the Staged T-SBEC at the beginning of the following thread are the Version 3 files. The .asm will be in the S-II zip folder.

    http://www.turbo-mopar.com/forums/sh...ht=staged+cals

    A drawback to V3 is that you don't have the WB2NB function I was hoping to use.

  8. #368
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,530

    Re: Turbonator SBEC Codebase

    Quote Originally Posted by Force Fed Mopar View Post
    I have a car I can't get this to work in. It's a factory VNT car but doesn't have the VNT stuff anymore. Has a cal from FWD-P in it that runs it that is supposed to be a modified VNT cal. I have tried both a VNT Daytona and a regular SBEC Turbonator, and neither will start or run the car. Tried 3 different chips. Anyone else having trouble with getting T-SBEC to work?
    I should update that I was trying to use a 27sf512 chip without a chip adapter. Which doesn't work obviously lol.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

Page 19 of 19 FirstFirst ... 91516171819

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •