I am running 87' TII electronics in my GLHT which is an 86', and I want to use the spare new style servo I have lying around.

I could not find any info about this, so I thought I would start a thread.

From what I can tell, it looks like I will need to add, or check to see that the fillowing wires are in the blue connecotr on the LM

Pin 4- Vac output
Pin 6- Vent output
Pin 9- Set signal
Pin 10- Resume signal
Pin 15- On/off switch.

From what I have been able to decipher about the servo wiring, it looks like this from left to right when viewing the pin portion of the plug with the clip facing the sky,

1. gnd
2. To brake switch?
3. Vac signal input
4. Vent signal input

Can anyone confirm this info, or offer tips?