Results 1 to 20 of 55

Thread: Parting out 86 LeBaron GTS heavily modded

Threaded View

  1. #1
    Garrett booster
    Join Date
    Jan 2006
    Location
    Canada
    Posts
    177

    Post Parting out 86 LeBaron GTS heavily modded

    I am located in Ottawa Canada, so beware of shipping costs and limitations.

    It was a modded 1986 LeBaron GTS (H) body / Lancer with red/burgundy interior,auto, no AC, no power seats, power mirrors, sunroof.
    Body has been repaired several times, it's now time to retire the great beast which has for a long time been putting down ~400Hp around city streets. The turbo compressor has once again hit the sidewall due to the engine cutout issue, and it is the last straw combined with the badly rusted rear quarters, the need for a full paint-job, suspension work, muffler...

    Parts that are spoken for:
    A. 3" Mandrel bent exhaust system.
    B. 1 year old rad.
    C. MSD Ignition Coil
    D. Strut tower bar


    All prices are in USD, shipping to where ever you are is extra. Local pickup in Ottawa Canada can also be done.

    Pictures:
    http://s92713009.onlinehome.us/86GTS/

    List of parts that will be sold mostly on forums, asking prices posted:
    SOLD 1. NEW never installed 3" TU Downpipe with 3" doughnut $90 USD SOLD
    SOLD 2. NEW never installed TU 3" swingvalve $230 USD SOLD
    SOLD 3. NEW never installed Turbonetics 0.63 A/R stage 1 Exhaust housing $160 USD(spare part ships fast) SOLD
    SOLD 4. NEW TU TI/TII Turbo Braided Steel Coolant and Oil Supply Line Kit - complete, new never installed, with instructions. $90 USD (spare part ships fast) SOLD
    SOLD 5. Walbro 255 in tank fuel pump that fit the 86 H body. (installed but almost new, from TU) $80 USD SOLD
    6. Two socketed 87 TII logic modules with 1 Catalyst 698-cat28c256li-120ns chip each, ready for reprogramming or to use as STOCK 87 TII LOGIC MODULES ON ARRIVAL. They come with switch for two different cals on each chip. One of them has an RS232 interface with cable for data logging with MoparChem or whatever other software you can DL. Both are using quality 3M ZIF sockets. As stated I can reprogram to 100% stock 87 TII and ship ready to use as normal LM. $60 USD each. See pics. (spare part ships fast)
    SOLD 7. GM 3 Bar map PN 12223861 $45 USD takes it SOLD
    8. T1/TII power module without plastic cover - tested working, should work for various years and models which had MPFI. (make offers if at all interested) (spare part ships fast)
    SOLD 9. 86 Lebaron GTS digital dash All operational. With narrow band 10 LED A/F gauge built in $35 USD SOLD
    10. Large CSI 30PSI direct drive boost gauge $7 USD
    11. Garrett TII Hybrid turbo (bit more hardcore than Super 70). Garrett T03 water cooled dynamic seals 50mm Stage 1 exhaust turbine with new steel shaft, 360 degree thrust bearing, large 73mm T04V compressor wheel, .48 A/R ported housing for better A/R. NO swingvalve. Needs rebuild after hitting compressor housing due to loss of oil pressure at boost - engine cutout, was fully rebuilt 8 months ago. $60 USD
    SOLD 12. TAFT Stage II ROLLER Cam with shimming washers, really excellent shape, good power. $110 USD SOLD
    13. Mopar Hydraulic lifter and roller set of 8 20,000Km, working well. $50 USD
    14. G-head (bathtub) with good stock rebuilt VALVES and SPRINGS installed, 56.4cc chambers, 100% solid (standard issue cracks in coolant channel but head holds 400Hp no problem [when the car was making that], no leaks guaranteed) - Make offers, no clue.
    SOLD 15. Low mileage Polybushings engine mounts (front , left-trans, right) fit 86 Auto H body $110 USD for all 3 SOLD
    16. Blue TIAL 50mm BOV with 2.5" T shaped welded intercooler pipe. Holds 30PSI easily. $150 USD
    SOLD 17. GTS brand tinted headlight covers for H body, with plastic mounts installed on entire GTS headlight frames if need be. Good shape, very solid mod. $35 USD (spare part ships fast) SOLD
    18. Huge XS Power EVO VIII bar and plate intercooler 2.5" I/O Core dimensions: 20" x 12.4" x4" Holds well at 30psi.
    Claimed over 1200 cfm flow at 1 psi pressure loss. $100 USD
    SOLD 19. Grainger valve (boost control) $15 USD SOLD
    20. Several TII distributors. $25 USD each (spare part ships fast)
    21. 4 TII pickup coils / HEP Hall Effect Sensors (tested working, some almost brand new) $25 each (spare part ships fast) 1 SOLD, 3 AVAIL
    22. GTS power mirrors, working 100%, yellow, would need repaint. Will sell individual mirror.
    23. Nippendenso 120AMP alternator $100 USD (spare part ships fast)
    24. Built A413 transmission, holds 400Hp, Cheetah RMVB, tightly set bands and packs, 5/5 clutch pack mod, welded pin open diff (so pin never falls out). Approx 5000Km since built with new clutches, bands and other parts, no issues. $250 USD
    25. 3 sets of four 15" rims, Pizza's in great shape (used to be polised up), Crabs in slightly sorry shape, and Acclaim dense spoke rims in pretty nice shape, all are straight. $50 USD per set.
    26. Almost brand new H body fuel tank. $40 USD
    SOLD 27. 40+ Injectors, set of 4, 20,000Km, no issues. $110 USD SOLD
    28. 1 piece intake with 4 port blue aluminum vacuum block (see pics) $50 USD
    29. 52 mm TB with AIS and TPS $40 USD
    SOLD 30. Working Charge Air Temp sensor $10 USD (I know, seems like it should cost $1) SOLD
    31. Coolant temp sensor 1 year old $10 USD
    32. Complete 87 TII wiring in pretty good shape $100 USD
    SOLD 33. Brakes
    Complete 11" Front brakes from 1989 to 1990 Daytona Shelby with 16" wheels, rear discs. New parts purchased approx 2 years ago: pads, Rotors, Hub assembly , calipers. Approx 5000Km since.
    10-5/8" solid rotor rear brakes from an '88 Lebaron.
    complete with brake lines ( the ones that are different than drum ones)
    and the matching master cylinder and proportioning valve. $250 USD for all brake parts including knuckles backing plates etc. SOLD
    SOLD 34. Almost new Mopar Distance/Speed sensor with adapter for both connector types $20 USD SOLD
    SOLD 35. MP Offset Camshaft Key Set of 5 $30 USD SOLD
    36. Lebaron GTS chromed front grille, good shape, nothing missing or broken. $25 USD (ships fast)
    SOLD 37. Dodge Lancer front grille, had a small piece chipped off in bottom right corner, now filled with epoxy and ready for re-paint. $20 SOLD
    38. H body rear wiper motor $20 USD
    39. 8mm spiral core silicone spark plug wire set (central wire is shorter and does not reach frame mounted coil) $20 USD
    40. Turbo aluminum valve cover, painted red and needs new paint. $30 USD
    SOLD 41. Shelby lancer ground effects, need paint or other repairs SOLDFront and Rear skirts SOLD
    SOLD 42. Shelby Lancer top/roof hatch spoiler, red, needs paint job and plastic screw cap. $30 USD SOLD
    43. 1 year old Gabriel front struts and springs cut down 1/2 turn for stiffness and ride height. Fit H body, Daytona etc. $100 USD
    SOLD44. 87 Daytona T1 Automatic Blue Streak Electronics Logic module cal 366 PN 5233366 $30USD + shipping SOLD
    45. Cruise control actuator from 86 GTS Automatic. working when pulled 10 years ago.
    47. 86 T1 Auto 2.2 Logic Module with MAP sensor cal: 536 PN: 5227536 $25 USD
    48. 86 2.2 Turbo I manual trans (GLH turbo) Logic Module without MAP cal 369 PN: 5227369 $25 USD
    49. Left Lebaron GTS/lancer black power mirror $25 + shipping
    54. 1 year old Lebaron GTS 2.2L Auto starter motor complete $45 plus shipping
    Last edited by bn880; 10-05-2009 at 10:38 AM. Reason: Sold parts.

Similar Threads

  1. General Parting out 88 T1 Lebaron vert
    By Clay in forum Parts For Sale
    Replies: 67
    Last Post: 09-09-2010, 10:39 AM
  2. General parting two lebaron convs 91 93
    By midohiomoparsource in forum Parts For Sale
    Replies: 12
    Last Post: 04-23-2009, 03:58 AM
  3. General Parting out 88 T1 Lebaron convertible
    By Clay in forum Parts For Sale
    Replies: 22
    Last Post: 05-16-2008, 03:03 PM
  4. Parting 89 Lebaron
    By stargazer7467 in forum Parts For Sale
    Replies: 0
    Last Post: 05-16-2007, 04:40 PM
  5. Parting out 1990 lebaron
    By knustylz kustomz in forum Parts For Sale
    Replies: 11
    Last Post: 04-20-2006, 02:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •