FS: S70, 3in SV, 60 trim, TBI header, PT750 IC, 70mm TB, etc

[8valves]

Come and get it. Make some resonable offers on some of these pieces, I'd like to get my car together sometime.

$500- Brand New rebuilt TU S70 Turbo. .63 exhaust housing, never been installed on a car. Save yourself $370 compared to buying one new without a core!!

SOLD PENDING PAYMENT- Brand New TU 3" Swingvalve. Never been installed on a car!

PACKAGE DEAL: Get them together for $700!!









$500- PACKAGE DEAL! Never used T04B 60trim, STGIII .63 hybrid turbo. It's been sitting for a while, hence the rusty housing, but it has obviously never been on a running vehicle. Setup with a 3" compressor oulet to clear the external wastegate provision on the TBI header!

Built by Glenn Smith back it the day and never used on the intended vehicle. The owner of this setup paid WAY more than this for it years back. Grab it and have some fun!













$150- BBK 70mm TB for a 5.0L Ford. Complete with TPS sensor. Never been on a running car. Was intended for the above build some years back and just never got used.





$150- Ported Avenger style 420A head. Exhaust ports on the front, the best (IMO) setup for a hybrid motor! As is, no cam caps or valvetrain.











$250- Precision Turbo PT750 A-A IC. The best intercooler cores on the market. Used on my old SC. Great piece for anyone wanting just about the best IC they can tuck into the nose of that chassis. You'll have a hard time over-working it!

Had a small hole welded before I bought it. I used it up to 32 psi without any issues.

Couplers not included.





$500- And the long tube header is still for sale.




Get in touch and let me know what you're thinking!

[turbodaytona87]

Just out of curiosity, does the header place the turbo over the trans?

["Top Fuel" Bender]

I thought you were keeping the long tube header
Maybe I should do a comparision test

[1966 dart wagon]

Just out of curiosity, does the header place the turbo over the trans?

i believe it puts it where the evap. canister is, so its on the opposite end by the timing belt/alt.

[1984rampage]

How did you have the IC pipes run on your shelby charger?

[8valves]

They ran through where a stock IC would be, then 180*d into the passenger side IC as the inlet, and up and out of the drivers side to the TB. Pretty simple really, plenty of room. I did cut the front bumper crash bar out though.

[8valves]

Swingvalve is sold pending payment.

[8valves]

TTT! Need some stuff gone!

[92spiritrt]

would you take $125 shipped for the throttle body?

[Austrian Dodge]

aaron, whats the size of the intercooler and the piping diameter? i'm considering to buy it, just need to know that and how much shipping would be

thanks

[8valves]

92Spiritrt, I'll do $125 shipped to your door. Add 3% if using paypal please. Contact me via PM if you'd like to purchase.

The intercooler core itself is 31.5 x 10.625 x 3.5, with 2.75" I/O, although a 3" coupler works on them. I ran a 2.5" inlet pipe and a 3" outlet on my car. It is rated to 750 CHP, although I've seen many a cars at over 800 WHP on them. Fantastic core design! PM me your address so I can get you a shipping quote, thanks!

[92spiritrt]

pm sent

[88C/S]

How well would the TU S70 work with a 1 piece mani, ported exhaust and ported g-head.

[8valves]

How well would the TU S70 work with a 1 piece mani, ported exhaust and ported g-head.

I don't see any reason why it wouldn't work just fine! I would use it, but don't need any other excuse to keep putting money into my daily Daytona.

[92spiritrt]

aaron,
i still need your paypal address so i can buy the throttle body. let me know. that way mr. slowe can finish my intake manifold.

[Austrian Dodge]

need to pass on the intercooler, sorry!

[8valves]

All PM's responded to guys, sorry for the delays!

Andy, disregard my PM I just sent then. Thanks!

[92spiritrt]

you now have a pm and money

[moparloper]

Did the Swing Valve ever sell?

[prep468k]

Whats the word on the SV ?