Flashable SMEC/SBEC Group Buy 1st round!

[janus]

The 28F256 chip - is that a 28-pin chip or a 32-pin?

data sheet says 32pin.

hey rob, i might be interested in taking a look at the pc-side program needed. just pm me with some details or requirements.

any reply to that?

edit: btw the flash chip in the sbec-II seems to be a TC97208 (-AP or -P) as by quantum.

[ShelGame]

data sheet says 32pin.


any reply to that?

edit: btw the flash chip in the sbec-II seems to be a TC97208 (-AP or -P) as by quantum.

Yeah, sure. What I had in mind was a prgram that would monitor a binary (specified by the user) and update the cal data as required. I still need to write the code for the SMEC side, so I don't know the requirements yet.

[ShelGame]

I got a shipping confirmation for the flash module boards. I'll have them next week. The serial/usb boards are going to be a little behind them. I was hoping to get them ordered in time to get on the same batch, but I guess I missed it. The serial/usb cables will be a couple weeks behind.

[ShelGame]

Boards came in today! Still waiting on the interface boards, though...

[vprtech]

boards came in today! Still waiting on the interface boards, though...

pics, pics !!!

[ShelGame]

Here you go...

[vprtech]

Very nice

[bris09]

Brian Sloat
1-SMEC
1 each of the cables (with hopes of using the USB later on)
Will supply a core

[ShelGame]

GLHSNSLHT2 x 1
MCSVT x 1
wowzer x 1
vprtech x 2
moparman76_69 x 1
zin x 1
bris09 x 1

That's a total of 8. Only 2 spots left for the first round...

[ShelGame]

Well, SBEC module tested OK tonight. I'm sure the SMEC version is OK, it was a proven circuit before. But, I'll try to get one built in the next week just to confirm. I need it for my minivan anyway.

Still no word on the serial/usb boards...

[GLHNSLHT2]

9 smecs are on their way to you Rob. Should be there next week.

[ShelGame]

Awesome, thanks!

[rich tideswell]

Rob,

Are you interested in purchising cores? I have a computer from a 1988 Plymouth Voyager that had a 3.0L V6 and 3 speed automatic transmission.

[ShelGame]

Not yet, I think I'm going to be set for a while. And, although a 3.0 computer will run the turbo code, I prefer turbo computers....

[ShelGame]

Finally got the shipment notification for the serial/USB boards today. Ack! I got to get to work on the connector mold...

[omnigoestohell]

sure, put me down for one... SMEC, serial cable and no core..

[TopDollar69]

Rob, put me down for a flashable SMEC, and a USB cable. I will supply my own core. One question, is the cable both serial and USB, or are you making two seperate cables?

Thanks,

Ben Huebner

[ShelGame]

2 separate cales. No way to make them in the same cable. Well, no way to make it fool-proof anyway...

Serial Boards are in, BTW. I'll post pictures later. I'm putting together my component order now.

[mcsvt]

Good news Thanks Rob.

[TopDollar69]

Then put me down for a serial and USB, it never hurts to have options.