Well after days of measuring and fabricating, i finally got everything welded up tonite. Check out the link for pics cuz i cant post attachments.
Its a 3" DP to a Magnaflow High-Flow Cat (thanks racing solutions) to a Dynomax race bullit. The system ends with a 2.25"x8" rectangle exhaust tip off a Z28 Camaro. The tip fits perfectly in front of the rear tire.
I am putting it on the car Wed, weather permitting. I will get pics of it installed ASAP.
http://www.cardomain.com/ride/2086441/7
Looks pretty nice. The tip is a nice addition too.
Make sure you post a video or sound clip of this when it's done.
Nice.
A vendor should sell these as kits.
I would buy one.
that looks damn good! i just put a 2.5" side exit on my car as well!
2.5" dp, cat delete, and glasspack
the tip is reallllly dirty... normally chrome
~Kevin
Originally Posted by turbomopar87
That really looks nice. You just can't beat it!!!!
By the way, if you right click on your cardomain pics and select properties, you can copy the link to the pic and post them using the advanced features.
I took the liberty of doing two for you. Sorry if I overstepped my bounderies.
Wink
you just made your turbo dodge .25 cents more valuable to the general public LOL
Looks good man
This is mine.
This is a real NASCAR boom pipe.
Inlet=3.50
lenght=3 feet
outlet=13 by 1 inch
That is sweet!
Frank
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
That is TOOOO COOOL!!!This is mine.
This is a real NASCAR boom pipe.
Inlet=3.50
lenght=3 feet
outlet=13 by 1 inch
Where'd you get it?
later Dick Westerhof
Is that really how much room there is from the end of the cat to the first 90* bend or can that be made more? I was thinking of using at least a 24" glasspack, if not longer. From the looks of this pic, I don't think anything longer would fit..
BTW: Where did you find that Camaro tip? Junk Yard? I may just be doing the same thing. That is too cool, next to the other one posted above
At local race store, BSR.That is TOOOO COOOL!!!
Where'd you get it?
Rattlesnake...yours is way cooler...lol
Is that really how much room there is from the end of the cat to the first 90* bend or can that be made more? I was thinking of using at least a 24" glasspack, if not longer. From the looks of this pic, I don't think anything longer would fit..
BTW: Where did you find that Camaro tip? Junk Yard? I may just be doing the same thing. That is too cool, next to the other one posted above
Yup, the exhaust runs right through all the stock tunnels there. That 90* bend was cut off the old cat-back system i had, and is in the same spot. I think that there was 37" of room between the DP and 90* (not 100% possitive on that # though, could be less), but it doesnt look like you will fit a 24" glass pack and a cat...i think my cat is like 16". You could cut the DP a little, i think there is about 6 inches of straight flat pipe, and move the cat up.
As for the tips, i joined a LS1 forum and posted a wanted add for them...those guys all upgrade their exhaust, so i figured they had the stock tips sitting around..i got 2 of them for $35.
I can make the 1 catback system as seen there(no muffler, just pipes) for $100 if anyones interested. Or just make the tip fit good onto a 12" long 3" pipe for $60. I have the extra 3" pipes and tip sitting around, so let me know.
Very nice Turbomopar87. I have a 3" pipe side exit now and it is hitting the ground a lot and closing off. I need to get one of these as well. I would like to see it on your car. Can you post a pic?
andy
rattlesnake
got a sound clip or vid of the car with the exhaust?
I'm waiting for my cal that Mr Paul from Turbos Unleashed has for over 2 months
I'll put one here as soon as I get it.
Heres the pics of the intall...sits ok for now, i gotta get it on a lift to get the hangers set up better. The claps are the only thing that hang too low, but i plan on welding the brakets on so the clamps will be eliminated soon.
The tip sits on that slight angle, which i am going to fix when i get the hangers settled
man does it sound great, and i definatly am going to get a sound clip soon.
theres more pics in the link, scroll to the bottom half of the page.
http://www.cardomain.com/ride/2086441/7
Nice pics, thanks
I have got to get me one of them.
andy
Here's mine on an Omni. It's only 2.5" but should flow good, and be relatively quiet. That's a Dunomax in there.
http://public.fotki.com/finallall/do.../hpim1069.html
http://public.fotki.com/finallall/do.../hpim1068.html
http://public.fotki.com/finallall/do.../hpim1070.html
Feel free to brouse the album.
Enjoy.
how loud is it finallall??
Posting Permissions
Reply With Quote
