1985 Dodge Omni GLH-T T2 part out

[j4278h]

*FREE SDAC DELIVERY ON ANY ITEM. ONLY REQUIREMENT IS PAYMENT IN FULL MUST BE MADE AHEAD OF TIME

Alright guys you know the drill. Car has maybe 3-4 days before the carcass is hauled to the scrap yard so speak up or forever hold you peace. Its a 1985 2.2 T2 manual a520. All glass is there. Car is supposed to run but is but wiring gremlins showed up and now its getting the ax. More pics tomorrow when we start pulling it apart.

Starting the list of parts

hood $100
tail lights pair $35
hatch $60
under hood main engine harness converted to under hood t2 status. few wires have been cut and need repair $75
rear bumper with end caps $50
front bumper with end caps $50
287 turbo head with modifications (Deuce Dodge knows the exact details) $300
radiator $25
struts pair $75
5 lug hub pair $120
A-520 3.50 fd trans with moly endplate $300
converted t1-t2 garrett turbo $150
rear shocks $50


More to come when we begin stripping it.

[strang3majik]

how much for the grille? And hows the interior?

[j4278h]

grille has been modified (cut to fit) for front mount intercooler and the interior is gone minus the dash which has 3 gauge holes cut into it.

[88C/S]

Is the 287 Turbo head still available?

[fishcleaner]

damn, I'm looking for the aluminum trim on the top of the right side rear door, but I don't see it in the picture, is it still there?

[WickedShelby88]

Hows the condition or the radiator? Is this a stock T1 style radiator? If so I want it.

[j4278h]

stock omni radiator. has some fin rot but holds water and cooled this thing well enough to drive it everyday in the summer with a front mount blocking airflow

[84omni]

Is the under dash harness all there and unhacked. and how much

Jason

[j4278h]

dash wiring is a hacked mess Free must pay for shipping.

Also Free Sdac Delivery bump buy it all guys.

[T-Bohn]

I am doing a 555 swap and need the center shifter console so i don't have to cut up GLHS #328 console.

Help me make it live again!!

any hope??

[strang3majik]

in that case...how's the underhood harness? Or are they both hacked up?

[j4278h]

dead omni pics

[j4278h]

storage vehicle that has these parts is being dealt with. any takers

[j4278h]

tossing parts back to the top

[msrettem]

I am looking for a non-cruise Blinker/Wiper Arm Assembly/Switch for a 1985 Dodge Omni. Do you have one that works? If so, how much would you charge with shipping to zip 84041. Thanks, Mike.

[minigts]

tossing parts back to the top

What are your interest in holding onto the driver's pillar cover until SDAC 20?

[j4278h]

What are your interest in holding onto the driver's pillar cover until SDAC 20?

Or I can bring it with me to R Kansas sat and you can pick it up from Gary when you get your front clip.

[minigts]

Or I can bring it with me to R Kansas sat and you can pick it up from Gary when you get your front clip.

Interesting! How much for it? I don't need it, but I'd like to have one to work on as a test project.

[blk86trbo]

Or I can bring it with me to R Kansas sat and you can pick it up from Gary when you get your front clip.

Do you still have the front airdam and side ground effects? If so, where are you driving through Illinois on your way to R Kansas? And would you happen to have any 4 lug 15" wheels?

[BoostedDrummer]

i know its a longshot, but how much for the k member and control arms? or will it be too big/heavy to ship?