No CEL flash?

[moparzrule]

OK I'm running the ''90MP_ATX_3-Bar_Sw-Bst_+20.zip '' in my 90' turbo mini. The van had 87 octane in it, and I went out for a drive to get gas and put some high test in it. Well I'm running 10 PSI boost right now, no IC. So I'm driving around, and with partial throttle it goes to the 10 PSI and started to miss and carry on a little bit, but WOT made it go away. Then after I put the high test in it didn't do it anymore. I never got the CEL flashing. Could it be something other than knock?

[cordes]

I'm not sure if it was ever fixed, but there was a time when the SBEC cals didn't have a functional CEL function even though it was an option.

[moparzrule]

Yeah I did use the second post ''revision'' with it saying the CEL was fixed. So I dunno.

[1BADVAN]

My mini did the same and found out the knock sensor was bad!

[moparzrule]

Huh, I will certainly give that a try. Thanks Matt!