Results 1 to 5 of 5

Thread: No CEL flash?

  1. #1
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    No CEL flash?

    OK I'm running the ''90MP_ATX_3-Bar_Sw-Bst_+20.zip '' in my 90' turbo mini. The van had 87 octane in it, and I went out for a drive to get gas and put some high test in it. Well I'm running 10 PSI boost right now, no IC. So I'm driving around, and with partial throttle it goes to the 10 PSI and started to miss and carry on a little bit, but WOT made it go away. Then after I put the high test in it didn't do it anymore. I never got the CEL flashing. Could it be something other than knock?

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,520

    Re: No CEL flash?

    I'm not sure if it was ever fixed, but there was a time when the SBEC cals didn't have a functional CEL function even though it was an option.

  3. #3
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: No CEL flash?

    Yeah I did use the second post ''revision'' with it saying the CEL was fixed. So I dunno.

  4. #4
    turbo addict
    Join Date
    Sep 2008
    Location
    Salt Lake City UT
    Posts
    1,603

    Re: No CEL flash?

    My mini did the same and found out the knock sensor was bad!

  5. #5
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: No CEL flash?

    Huh, I will certainly give that a try. Thanks Matt!

Similar Threads

  1. T3 Stock W/ CE Flash and 2-step added
    By ShelGame in forum ECU Code Repository
    Replies: 8
    Last Post: 04-18-2011, 09:30 PM
  2. new guy here
    By Shark91 in forum The Original "Turbo Dodge" Cars
    Replies: 106
    Last Post: 02-02-2008, 03:44 AM
  3. Flash codes from an OBDII Buick, is is possible?
    By TopDollar69 in forum Other vehicles
    Replies: 6
    Last Post: 08-26-2007, 01:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •