GLHS specific and Performance parts

[tvanlant]

Hey guys,
I'm starting a new thread with some new parts and with some left overs because the other thread was getting messy and hard to follow.

MSD 6A ignition box - with Accel performance coil (painted black) $100
http://www.turbo-mopar.com/forums/ph...hp?photo=12337

Distributor – includes hall effect pickup, Mopar unit with about 15k miles on it. $55 PENDING

Downpipe – 2.5” with dohnut. Has bung for wideband. $50

3 Bar MAP sensor – with pigtail connector, GM style. $54 PENDING
http://www.turbo-mopar.com/forums/ph...282&ppuser=108

ARP head bolts - $40 PENDING

Mopar Knock sensor – New. $25 PENDING
http://www.turbo-mopar.com/forums/ph...320&ppuser=108

Flowtech Warlock Muffler (2.5") $40
http://www.jegs.com/i/Flowtech/387/50552/10002/-1
http://www.turbo-mopar.com/forums/ph...hp?photo=12455
http://www.turbo-mopar.com/forums/ph...hp?photo=12454

GLHS engine wiring harness – pins swapped to 87 TII electronics. $100 PENDING
http://www.turbo-mopar.com/forums/ph...418&ppuser=108
http://www.turbo-mopar.com/forums/ph...419&ppuser=108

"SHELBY" rear window decal (Brand new) $50 OBO PENDING
http://www.turbo-mopar.com/forums/ph...hp?photo=12429

"SHELBY" side skirt decal (Brand new) $50 OBO
http://www.turbo-mopar.com/forums/ph...hp?photo=12428

"INTERCOOLED" glhs hood scoop decal $50 OBO
http://www.turbo-mopar.com/forums/ph...hp?photo=12424

Shift pattern decal for the Momo GLHS leather shift knobs (brand new) $Make offer
http://www.turbo-mopar.com/forums/ph...hp?photo=12430

Striped GLHS door/fender decal (Brand new) $50OBO
http://www.turbo-mopar.com/forums/ph...hp?photo=12426


(4) Centurian II wheels – fantastic shape. $350

(1) Centurian II wheel – very good shape. $100

(1) Centurian II wheel – good shape, needs refinishing $65

(2) BFG KDW2s – 205-50-15s. ONLY 500 Miles on them. $185
http://www.turbo-mopar.com/forums/ph...hp?photo=12423

(2) BFG G-force T/A drag radials – 205-50-15s. A little tread left, but lots of runs left in them. They work best after the tread is gone. $100
http://www.turbo-mopar.com/forums/ph...hp?photo=12422




Please PM if you are interested.

[tvanlant]

Update: New prices

[TheCanadian007]

Any pics on that Warlock muffler?

[tvanlant]

Yes!

http://www.turbo-mopar.com/forums/ph...hp?photo=12454
http://www.turbo-mopar.com/forums/ph...hp?photo=12455

[trannybuster]

ARP head bolts - $40

Are these the head bolts that can be installed with a allen wrench and are 11mm? THX...

[janus]

what are the dimensions of this shelby window decal?

[tvanlant]

trannybuster - these ARP bolts, not studs. You use a 12 point 13mm socket. Studs require the allen wrench. Yes, they are 11mm. The benefit of the bolts over the studs is that you can swap head gaskets very easily without removing the head from the car.

Janus - The rear shelby decal is 31" x 4.5"

[trannybuster]

I saw arp and just assumed 'studs'. Read what I wanted to see...doh...thanks but I obviusly I was lookin for STUDS.

[tvanlant]

I need to get rid of this stuff. Please make some offers!

[janus]

pm'd you an offer

[fernando]

tyler if you dont sell the 3 bar map add that to my list please

[Force Fed Mopar]

You don't happen to have a sound clip of that muffler do you? Curious as to how it sounds on a 2.2/2.5.

[tvanlant]

I do not have a sound clip. When capped, it is almost silent. Uncapped, it sounds like a regular straight-through muffler, like a dynomax. I kept it uncapped most of the time because it sounded good and not obnoxious or cackley.

[vivoauto]

Do you still have some parts

[TheCanadian007]

Neeeeeeeeeeeeevermind, just noticed the pictures you posted way above, lol. Forget I asked about it.

Muffler still for sale then?

Regards, TheCanadian

[tvanlant]

Yep, still for sale.

[tsiconquest88]

pm'd ya on the distrib/hall effect pm me back