External fuel pump recommendations needed

[mcsvt]

Well my fuel pump took a crap. Pulled it out, seems that it wouldn't have been up to the task anyway after checking the specs.

What I need, something with AN on both ends. The one I have right now was using -10 clamped on the inlet side and -8 screwed onto the outlet with an adapter.

What pumps are recommended for our applications? I have -8 from the outlet to the rail. Goal is 350+ and support for more is always good. No in tank pump, car has a fuel cell.

[risen]

I found these a while ago, but I was mostly interested in their regulators which (I believe) wouldn't require a return from the fuel rail.

http://www.sx-performance.com/Fuel_Pumps.htm

[t3rse]

you can get walbro 255s that go inline with 10mm fittings on both ends for -an adapters...

[turbovanman²]

Any pump you want really. YOu can run Aeromotive, Holley, Walbro etc or even Bosch VW/Audi pumps.

My current setup is a weak intank 255 pump then an inline Walbro 255 pump and I have more than enough fuel,

[mcsvt]

There was a Bosch on the car, looks to have come from an '83 BMW 320i... Seems like a good pump but maybe not for 30psi...

I was thinking aeromotive, but I'll take any recommendations.

[contraption22]

My S60 pump is keeping up pretty well... i havent found the limit yet.

[mcsvt]

I'm sold if it's good enough for the contraption, I see it's half the price of the Aeromotive too...

Thanks t3rse and Mike.

[turbovanman²]

My S60 pump is keeping up pretty well... i havent found the limit yet.

I think its a 255 pump just rebadged S60,

Your also paying for the name as Dodge wants a MINT for it,

[contraption22]

I think its a 255 pump just rebadged S60,

Your also paying for the name as Dodge wants a MINT for it,

I'm sure it's nothing special. But it is a Bosch pump, not a Walbro.

[turbovanman²]

I'm sure it's nothing special. But it is a Bosch pump, not a Walbro.

Yeah, your right, I inquired about one years ago and I think the dealer wanted $300+, I was like, no thanks,

[cordes]

I think its a 255 pump just rebadged S60,

Your also paying for the name as Dodge wants a MINT for it,

I looked up the flow rate of the S60 pump and posted it a few days ago. IIRC it was slightly less than the 255. 220 I think actually.

[turbovanman²]

I looked up the flow rate of the S60 pump and posted it a few days ago. IIRC it was slightly less than the 255. 220 I think actually.

Sounds right, I remember it not being quite 255 but its been about 5 years since I enquired about one.

[mcsvt]

Ah I thought it was the same as the Walbro.

Looking at the fittings I'm just worried about going from a -10 on the inlet to a -8 on the outlet. The walbro only has 10mm inlet and outlet, seems counterintuitive.

[t3rse]

unless you are planning on pushing 600 chp it won't be an issue

[turbovanman²]

unless you are planning on pushing 600 chp it won't be an issue

+2,