Nobody on the other forum seems to know or maybe I'm not asking the right Q. Where can i get the input shaft seal for an a520? All the parts stores list is an output shaft seal which is for the axles right? Are they the same part #?
Nobody on the other forum seems to know or maybe I'm not asking the right Q. Where can i get the input shaft seal for an a520? All the parts stores list is an output shaft seal which is for the axles right? Are they the same part #?
I have heard people say that they are the same PN, but that certainly wasn't the case on the 523 I replaced the seal in before, and it doesn't look like that would be the case with my 555s either.
I was able to pick up the seal at NAPA when I got mine.
National Input Shaft Seal
Part Number: 3732S
SEALS/LIP MATERIAL-NITRILE; SHAFT SIZE 1.062 in.; HOUSING BORE 1.575 in.; SEAL O.D. 1.581 in.; SEAL WIDTH .250 in.
Any part of the O'Reilly store or, Napa, or Carquest,
Thanks guys! Napa has it as a special order part. Took some searcing through their books/computer but they found it with a cross reference to that number.
I would just go to the delear. I bought one a few weeks ago for the 555 I rebuilt.
Otherwise check the fitment with the aftermarket. They have a seal repair sleeve listed for our transmissions and it does not fit. Not even close.
Justin
84 Plymouth Voyager LE 2.5 Intercooled Turbo 5-spd - Only 84 Turbo Van!
89 Dodge Caravan ES 2.4 SRT-4 Intercooled Turbo (46 trim, OS Valves, CP Pistons, Eagle Rods, NPR IC) Built 31th trans
91 Dodge Shadow Convertible 2.5 Intercooled Turbo A555 5-spd
01 Pontiac Grand Prix GTP - 3.8 supercharged! Only 5K miles....
01 Subaru Forester - Daily Driver
07 Yamaha FJR 1300 140+ HP on 2 wheels
85 Honda Nighthawk 450
94 Bobcat 763 Skidloader 2.2 Kubota Diesel
SV-SDAC Member
These guys seem to have the part numbers all figured out.
http://www.turbo-mopar.com/forums/vb...&articleid=134
thanks all. dealer had it