Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Thread: first time out for Rampage

  1. #1
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    first time out for Rampage

    It was great to be back in the seat again! Car ran mint I did nothing to the tune or engine since the trans broke last fall. I made about 5 passes , got the data logger on the last 2. Its harder to hold it on the line with the 3.22 gear ratio. The trans brake is still slightly slow to release. First pass was 11.17@131 with a 1.94 60ft...track was not run on at all after the days rain. Second pass a 11.04@ 132 with a 1.96 60ft. Spinning hard all the way through second all night.
    After the first few runs and getting a good burnout Managed a 10.87@132 .
    Then I pulled out the lap top and moved the rev limiter up to 7500 from 6500 going through the traps at 6500 now. Damn shift light would not adjust now comes on at 5500 so its always on was getting bright by the end of the night.
    Then ran a 10.70@132 with a 1.888 60ft and the final pass a 10.68@132.9 mph with a 1.81 60ft.

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  2. #2
    turbo addict blk86trbo's Avatar
    Join Date
    Dec 2005
    Location
    Land of Lincoln
    Posts
    2,556

    Re: first time out for Rampage

    Wow that really hauling Dean, congrats. Hope to someday see your Rampage in person
    [FONT="Arial Black"]Paul[/FONT] [B][SIZE="1"]US ARMY INFANTRY VETERAN[/B] 1995 Dodge Stealth R/T White DOHC 5 speed 1994 Dodge Stealth R/T Red DOHC 5 speed 1992 Dodge Daytona IROC, Blue TI 5 speed (2) 1992 Dodge Daytona IROC, Red TI auto 1991 Dodge Spirit R/T, Red (project) 1989 Shelby CSX-VNT #382 1989 Dodge Shadow ES, White TI auto 1987 Daytona Shelby Z, White TII 1987 Chrysler T&C wagon, Tan TII auto 1985 Dodge Lancer ES, Bronze TI auto 1982 Wife, White[/SIZE] [SIGPIC][/SIGPIC]

  3. #3
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: first time out for Rampage

    Man you've got a lot going on after that first 60' 10:60 on a 1.8x short time is a whole bunch of acceleration but then you already know that

    Where do you go from here? Any plans for the next few tenths since you've got the trans doing what you want it to? Ready for a taller slick now?

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  4. #4
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: first time out for Rampage

    Good runs for the 1st time out! How violent is the launch with the brake vs. before?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  5. #5
    Hybrid booster
    Join Date
    Mar 2006
    Location
    Portland, Oregon
    Posts
    692

    Re: first time out for Rampage

    Awesome car! Wish I could see it run sometime, but I'll have to be content with a video. Once the track improves, the times will drop I bet.
    1986 Chrysler Lebaron 2 dr. R.I.P. 2.2 T1 log intake, modified to intercool Best 1/8th 9.03@77mph / Best 1/4 14.16@93.55mph Running on E85:nod:[SIGPIC][/SIGPIC] '93 Spirit 2.5 TBI 5 Spd(sold), '85 Ramcharger, 360 4brl, NP435 4 Spd. The new ride; '90 Sundance 2.5 T1/5 spd. FMIC(from Ford Probe) new Mitsu; Best 1/8th 8.96@79.16 / Best 1/4 14.06@101.27

  6. #6
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: first time out for Rampage

    Quote Originally Posted by BadAssPerformance View Post
    Good runs for the 1st time out! How violent is the launch with the brake vs. before?
    The launch was soft with the brake just seeing how it would release but I think I'm gonna have to use it even if it still delays releasing a bit not sure the brakes will hold it now with the 3.22 gears was pulling me through the lights last night.Sure feels stronger through the mid range with the gear change be nice to see how it is when the track is better was like MIlan at sdac 18 last night lol!

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    Woodville Ala.
    Posts
    1,727

    Re: first time out for Rampage

    Nice runs!!! :thumb

  8. #8
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: first time out for Rampage

    Quote Originally Posted by Rampage16V View Post
    The launch was soft with the brake just seeing how it would release but I think I'm gonna have to use it even if it still delays releasing a bit not sure the brakes will hold it now with the 3.22 gears was pulling me through the lights last night.Sure feels stronger through the mid range with the gear change be nice to see how it is when the track is better was like MIlan at sdac 18 last night lol!
    So how much boost did you hit it from?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  9. #9
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: first time out for Rampage

    about 13 psi

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  10. #10
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,966

    Re: first time out for Rampage

    Nice good to hear you got in running again
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

  11. #11
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: first time out for Rampage

    Quote Originally Posted by Rampage16V View Post
    about 13 psi
    And the brakes wont hold that?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  12. #12
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: first time out for Rampage

    barely used to when I had 2.98 gears

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  13. #13
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: first time out for Rampage

    Quote Originally Posted by BadAssPerformance View Post
    And the brakes wont hold that?
    You and your brakes, they won't hold, we have auto's, lots of power to hold back,


    Great runs Dean. What boost?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  14. #14

    Re: first time out for Rampage

    I hope to have mine out friday. how do you like the new TC. I hear the trans brake has some problems if its like racersteve.

  15. #15
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: first time out for Rampage

    Quote Originally Posted by Rampage16V View Post
    It was great to be back in the seat again! Car ran mint I did nothing to the tune or engine since the trans broke last fall. I made about 5 passes , got the data logger on the last 2. Its harder to hold it on the line with the 3.22 gear ratio. The trans brake is still slightly slow to release. First pass was 11.17@131 with a 1.94 60ft...track was not run on at all after the days rain. Second pass a 11.04@ 132 with a 1.96 60ft. Spinning hard all the way through second all night.
    After the first few runs and getting a good burnout Managed a 10.87@132 .
    Then I pulled out the lap top and moved the rev limiter up to 7500 from 6500 going through the traps at 6500 now. Damn shift light would not adjust now comes on at 5500 so its always on was getting bright by the end of the night.
    Then ran a 10.70@132 with a 1.888 60ft and the final pass a 10.68@132.9 mph with a 1.81 60ft.
    Nice job Dean! Good to see the car have a great first outing. Get that 60' back to your previous 1.60 and your back in the low 10's What are your initial thoughts on the gear change?

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  16. #16
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: first time out for Rampage

    Quote Originally Posted by turbovanman View Post
    You and your brakes, they won't hold, we have auto's, lots of power to hold back,

    And you dont run line locks why?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  17. #17
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: first time out for Rampage

    Quote Originally Posted by BadAssPerformance View Post
    And you dont run line locks why?
    Money etc. I would need to wire in 2 of them plus I can launch just fine with what I have now,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  18. #18
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: first time out for Rampage

    Quote Originally Posted by ohiorob View Post
    I hope to have mine out friday. how do you like the new TC. I hear the trans brake has some problems if its like racersteve.
    torque is mint 4000 stall right on the nose. I have drilled a 1/8th hole in the front clutch piston to help it release a little faster and its almost perfect just a slight clunk/hang up might have to use it with this gear change I can't hold it on the line as well.

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  19. #19
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    866

    Re: first time out for Rampage

    Quote Originally Posted by turbo2point2 View Post
    Nice job Dean! Good to see the car have a great first outing. Get that 60' back to your previous 1.60 and your back in the low 10's What are your initial thoughts on the gear change?

    I like the gear change defineately pulls harder through mid and top of track was spinning all the way threw 2nd gear. and trapping at only 6500. better then 6000 I guess.

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  20. #20
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: first time out for Rampage

    u goin this saturday too?

Page 1 of 2 12 LastLast

Similar Threads

  1. First time out with the CSX-VNT
    By dodgeshadowchik in forum Strip & Street Stories
    Replies: 28
    Last Post: 02-05-2008, 09:40 PM
  2. First time at the track with my 87 CSX
    By mcglsr2 in forum Strip & Street Stories
    Replies: 19
    Last Post: 01-15-2007, 10:40 PM
  3. Analzye my time slip......14.06@100mph at Lebanon Valley NY.
    By inmyshadow in forum Strip & Street Stories
    Replies: 22
    Last Post: 01-15-2007, 02:40 PM
  4. A little too much power at the wrong time...
    By powermaxx in forum Strip & Street Stories
    Replies: 10
    Last Post: 05-28-2006, 04:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •