I am redoing my trans cooler and figured I might as well stop using the slide and clamp regular hose and upgrade to remove hose ends, IE Earls etc so I can just unscrew the fitting off the trans. I have gone thru the book and am a little confused. I just want to use the Earls or whomever fittings and put regular hose on, that way, its alot cheaper and easier and no special fittings, crimpers etc.
So I'll be running -6 for the trans, which is 3/8, stock is 5/16.
This is the fitting I am looking at, so could I use this and slide on regular hose and clamp it? If not, what other options do I have. I dont' want to spend a $1000 doing this,
http://store.summitracing.com/egnsea...700+400041+115