Sometime in the future I will bolting up a GT30R and need to know what fittings will be needed to adapt my current Turbo Nation lines (FWD/TU braided line kit) to plumb this turbo. Does anyone by chance have this info?
Sometime in the future I will bolting up a GT30R and need to know what fittings will be needed to adapt my current Turbo Nation lines (FWD/TU braided line kit) to plumb this turbo. Does anyone by chance have this info?
I believe ATP turbo has some of the fittings which the GT turbos require. From there you can probably make them work with ease.
that or you will be buying GT series lines
what are the coolant ports and the oil line inlet? i assume you would just need some NPT adapter fittings.
Brian
Originally Posted by turbovanman
all the GT stuff I put on the vw's and audi's all use banjo bolts and washers
not sure on the sizes though
sorry
10's AGAIN '07, '08, '09
TFB Fabrications custom billet machined parts for you Turbo Mopar
M14 on the coolant fittings THEY ARE NOT NPT
dont quote me on the oil feed, but 7/16" male inverted flare fitting sounds right
http://www.atpturbo.com/Merchant2/me...egory_Code=GRT
look at the related items at the bottom of the page. has a bunch of fittings on there.
Brian
Originally Posted by turbovanman
stock lines will be fine once u get the proper fittings
if yuor runnning internal gate, things get really tight for the oil feed line where the fitting goes. you should find a fitting with a 45 on it (female to male an...whatever size feed line is?? 4an?). use this to attach to the 7/16 fitting in the center section, which will give the feed line clearance to go through the wastegated area.
i got 2 90s right now doing the job, looks a little funky but its working. once I get a 45 i can elimate these 2 90s and make things look a little cleaner