1991 Daytona ES turbo complete part out

[j4278h]

This is the second car to get parted out. Bought it off a member here about a year ago. The car smoked, don't know if it was bad rings, head gasket, or turbo. Already pulled the engine harness and computer. White with grey gfx and burgundy cloth interior.

passenger tail light $10
drivers tail light $10
center tail light $5
center spoiler $5
side spoilers $5 each
hatch $15
rear bumper cover with gfx $15
sunroof $15
turbo hood $50
driver fender $15
passenger fender $15
driver side gfx $15
passenger side gfx $15
driver door $10
passenger door $10
power mirror pair $20
nose cone $20
front chin spoiler $50
head light pair $20
driver seat $20
passenger seat $10
rear seat $10
turbo instrument cluster $50
turbo engine $150
turbo auto $100


If there is anything I missed let me know and I will post a price.

Car Doesn't have very long to live, maybe until friday 5-8-09 or sat 5-9-09 so speak up soon.

Local pickup is preferred but will ship anything and everything.

[BadAssPerformance]

johnmesich in 3... 2... 1...

[j4278h]

Tried giving it a few days going whole but its chop chop time as I do not have forever to get rid of these parts cars.

[tsiconquest88]

can i get the clutch cable retainer and grommet that slides onto the fork lever? give ya like 15 bucks for them as long as they are in good shape!!! im assuming its got a 520 or 555 (however i think all the 5 speeds had the same retainer and grommet?)

[Sloride]

which center stack does this car have??

im looking for the ash tray bottom part of the stack that has vents then hvac then radio then ashtray (minus the misc tray... unless i just swap over...)

[j4278h]

will get a pic tomorrow and report back then on the radio surround

[j4278h]

also this is an automatic car so no clutch cable setup

[JohnnyIroc]

haah sorry JT i was a little late
how good is that sunroof and is the passenger fender clean?
do you have the computer still if not i know ill be needing a few parts off it maybe the gfx as a backup

[tsiconquest88]

oh ok sorry, i assumed it was a 5 speed car lol.

[Hairy Kyle]

what kind of front arms does it have pics pm me

[j4278h]

Car is dead and partially on the trailer. I will be updating the listing tomorrow with everything that was pulled.

The car has the 1991+ cast control arms that are available for $25 pair.

[minigts]

EDIT: Sorry, just saw rear bumper cover with gfx $15. If it's still available would you be able to send to SDAC? I can pay beforehand.


Rear bumper? Maybe you could send it down to SDAC? If so and it's still available, how much?

[j4278h]

$15 for the rear bumper cover. Unfortunately I need the stuff gone and would prefer not to hang on the the parts until late June.

[j4278h]

The actual bumper would not unbolt due to rust so it stayed with the rear of the car, sorry if that is what you were asking for.

[minigts]

$15 for the rear bumper cover. Unfortunately I need the stuff gone and would prefer not to hang on the the parts until late June.

Hmm, would you ship it? Thinking no, but never hurts to ask. You could do this:

Measure it and see if it's wider than 63 inches. If it is, cut it in half and ship it. If not, would you ship it whole?

[BadAssPerformance]

Hagger I got a call from a guy in NY looking for '91 Daytona parts... I told him about this thread

[j4278h]

Thanks for passing the word along JT.

I have no problem shipping anything I have for sale. But due to the size of the bumper cover shipping will be pricey.

I will measure it tomorrow but I'm almost positive its too big to ship fedex within a reasonable price range. I can send it Greyhound and you pick up at the nearest bus station to you. Usually its 50-70 to do that. Will check the shipping costs using that method tomorrow.

[minigts]

Thanks for passing the word along JT.

I have no problem shipping anything I have for sale. But due to the size of the bumper cover shipping will be pricey.

I will measure it tomorrow but I'm almost positive its too big to ship fedex within a reasonable price range. I can send it Greyhound and you pick up at the nearest bus station to you. Usually its 50-70 to do that. Will check the shipping costs using that method tomorrow.

If it's over 63 inches, will you cut it in half? It'll save on shipping.

[j4278h]

I'll cut it into 1/4's and toss it in a flat rate box to really save on shipping. heck I'll even toss in some Elmers school glue and duct tape

[minigts]

I'll cut it into 1/4's and toss it in a flat rate box to really save on shipping. heck I'll even toss in some Elmers school glue and duct tape

Well half would be good (assuming it's over 63 inches wide) as I would like to work on fabricating that back end to go on the Charger. Probably should photoshop it to see how it would look, but I'm guessing it would look ok.