Of First i did the sonnix repair flushed it and drove it for a few weeks and it started to do it again. I had the van apart for the brakes and struts so i dropped the pan and govenor and MADE sure the valves moved FREELY no binding and anything. Put it all together and its still the same from time to time.
I do have a spare fresh trans but i wanted to save it.
Someone told me to turn up the line pressure one or two turns and it should help will it ?
OR is it time just to say screw it
dropped the pan one LAST time i said if its still not right then trans comes out. Found the valve hanging up on the sonnix bracet dropped the valve body again (getting to be a expert at this point) and adjusted the bracket put it all back together and its good shifts great!!!!!
cool thanks for the update! so many people leave us hanging on forums when they figure the problem out and dont come back to tell us what it was..
nah yea i figured it had to be something i had to have done since it sometimes hung up then after i did it it did it all the time.
Now this gives me time to do the build on the motor/trans
Posting Permissions
Reply With Quote