Results 1 to 16 of 16

Thread: Parting out 85 Glh-t t2

  1. #1
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Parting out 85 Glh-t t2

    This car has been in many west Michigan td'er hands. Deuce Dodge built this car for his son and they raced for couple of years. I acquired it last fall and can not get it running due to the cobble --- wiring job on it.

    The car is a '85 with a t2 conversion, previous owners state the car runs great and drives great also (maybe if the wiring was not a complete cobble f), it has a built g head with high rpm lifters, etc. Has a non c/b but handles 20psi plus no problem. Has a newer turbo that burns ZERO oil. Transmission is an A-520 with a chrome-moly plate and it has been gone through not too long ago. Clutch is a t2/t3 and grabs great. Engine mods are as follows:

    +20s $135
    afpr $110
    walboro 255 $85
    small npr front mount $125
    boost, oil, temp, and a/f gauges $110
    pilot after market steering wheel $25
    has a newer o2 sensor $20
    87 P5249671 mopar performance cal stage 2 $100
    88 A520 3.50 fd with moly plate $300
    T2/T3 clutch $75
    Garrett T1 with poor mans compressor cover mod to work on t2 cars $150
    85 T1 engine lower end 80k miles $200
    287 turbo g head with unknown lifters and springs (Deuce Dodge should be able to provide that info) $250
    4 door l body window scrapers/sweeps in great shape $150
    main engine harness $35
    tail lights $30
    hatch with no reverse light $15
    doors $5 each
    fenders $15 each
    some weird red seats $10 pair
    black turbo hood $40
    turbo tank $35

    If there is anything I'm forgetting to list contact me because the whole car is going under the knife this weekend.

    everything located in Paw Paw Mi 49079
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P4160745.JPG 
Views:	133 
Size:	219.0 KB 
ID:	13973   Click image for larger version. 

Name:	P4160746.JPG 
Views:	133 
Size:	220.3 KB 
ID:	13974   Click image for larger version. 

Name:	P4160747.JPG 
Views:	134 
Size:	236.3 KB 
ID:	13975   Click image for larger version. 

Name:	P4160748.JPG 
Views:	124 
Size:	258.0 KB 
ID:	13976   Click image for larger version. 

Name:	P4160749.JPG 
Views:	143 
Size:	251.4 KB 
ID:	13977   Click image for larger version. 

Name:	P4160750.JPG 
Views:	124 
Size:	265.2 KB 
ID:	13978  

    Click image for larger version. 

Name:	P4160751.JPG 
Views:	116 
Size:	317.5 KB 
ID:	13979  

  2. #2
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: Parting out 85 Glh-t t2

    Does it have a title? What would you sell the complete rolling shell for? With the extra fenders and door you mentioned in the other thread? Basically, I'd be interested in everything minus the drivetrain - sounds like you can keep the underhood wiring/computer, too ...

    EDIT: I think I'd want a late-model A523. Do you happen to have one you could sell with it?
    Last edited by ShelGame; 04-16-2009 at 03:31 PM.
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Parting out 85 Glh-t t2

    What are you doing,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  4. #4
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: Parting out 85 Glh-t t2

    Mostly, I want a fun DD. Maybe an A/FS car My wife will kill me... lol

    I don't care. I'll keep her in the Infiniti G35 and she'll be happy...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  5. #5
    turbo addict Turbo Mopar Contributor Mario's Avatar
    Join Date
    Dec 2005
    Location
    Motor City
    Posts
    2,604

    Re: Parting out 85 Glh-t t2

    Quote Originally Posted by ShelGame View Post
    EDIT: I think I'd want a late-model A523. Do you happen to have one you could sell with it?
    I have one.
    Mario Di Cesare [url]www.boostedmopar.com[/url] 1985 Dodge Omni GLH - The Original "BOOSTBOX" 1991 Spirit R/T - "Grandma Boost" [url]http://www.turbo-mopar.com/forums/showpost.php?p=270429&postcount=1[/url]

  6. #6
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: Parting out 85 Glh-t t2

    Quote Originally Posted by Mario View Post
    I have one.
    What FD ratio and how much? They use the same axles as the A413, right?
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  7. #7
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,813

    Re: Parting out 85 Glh-t t2

    i will take the shifter cables if they are a decent price

  8. #8
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Parting out 85 Glh-t t2

    Quote Originally Posted by ShelGame View Post
    What FD ratio and how much? They use the same axles as the A413, right?
    Yes.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  9. #9
    turbo addict Turbo Mopar Contributor Mario's Avatar
    Join Date
    Dec 2005
    Location
    Motor City
    Posts
    2,604

    Re: Parting out 85 Glh-t t2

    3.85. It's a 1992 one. $250
    Mario Di Cesare [url]www.boostedmopar.com[/url] 1985 Dodge Omni GLH - The Original "BOOSTBOX" 1991 Spirit R/T - "Grandma Boost" [url]http://www.turbo-mopar.com/forums/showpost.php?p=270429&postcount=1[/url]

  10. #10
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Re: Parting out 85 Glh-t t2

    Quote Originally Posted by ShelGame View Post
    Does it have a title? What would you sell the complete rolling shell for? With the extra fenders and door you mentioned in the other thread? Basically, I'd be interested in everything minus the drivetrain - sounds like you can keep the underhood wiring/computer, too ...

    EDIT: I think I'd want a late-model A523. Do you happen to have one you could sell with it?

    Yes clean title.

    Roller with steel wheels $600
    A-523 with 3.77 fd $225

  11. #11
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,813

    Re: Parting out 85 Glh-t t2

    wanna sell the shifter cables? are they out of a shadow

  12. #12
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    Re: Parting out 85 Glh-t t2

    Quote Originally Posted by j4278h View Post
    some weird red seats $10 pair
    LOL....i believe they are from a dynasty


    jason do u have any louvers for a charger by any chance??

    free bump

  13. #13
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Re: Parting out 85 Glh-t t2

    No charger louvers or shadow shifter cables for the a520/a555.

    I do have an offer on the rolling shell that I'm thinking about but everything else is up for grabs.

  14. #14
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Apr 2006
    Location
    SoCal
    Posts
    902

    Re: Parting out 85 Glh-t t2

    do you have any pics of the inside of the rear hatch area? I need some of the interior plastic stuff and the carpet area in the hatch that lifts when you raise the hatch (I dont know what its called) and what kinda shape is the grille in?

  15. #15
    Supporting Member Turbo Mopar Contributor j4278h's Avatar
    Join Date
    Dec 2005
    Location
    michigan 49045
    Posts
    2,086

    Re: Parting out 85 Glh-t t2

    no interior plastic remains past the front seats. previous owners ripped it out to lighten the car.

    Grill has been hacked to accommodate the npr intercooler.

  16. #16

    Re: Parting out 85 Glh-t t2

    What about steering column? If its grey and has a key.. Im interested.. I have looked up a few on car-part and they go for like 40 plus shipping so let me know..

Similar Threads

  1. General Parting out 86 Turbo Z CS w/ T2 A555
    By Tonatom in forum Parts For Sale
    Replies: 7
    Last Post: 04-17-2009, 07:38 PM
  2. General Claytons Junk Sale along with... Parting Out: 87 CSX and 85 GLH
    By moparfwdsleeper in forum Parts For Sale
    Replies: 8
    Last Post: 12-31-2008, 06:08 PM
  3. Replies: 6
    Last Post: 10-17-2008, 02:08 AM
  4. For Sale 86 GLH Turbo T2 (Michigan)
    By glh_turbo22 in forum Cars
    Replies: 9
    Last Post: 11-26-2007, 09:24 AM
  5. T2 Rods, T3 Pistons, GLH Fog Lights
    By iniviate in forum Parts For Sale
    Replies: 3
    Last Post: 06-06-2007, 02:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •