SBEC Chip Converter Group Buy

[AzShadow]

im having some issues....finally finished up school so i got around to putting it in...plugged it all in and the fuel pump isnt pressurizing....on and off with the key a few times and it did pressurize for like half a second but that was it...the car does crank. i socketed the unit myself and THINK i did it all correctly. i cant really understand the one post on how to check it with the multimeter so if you could pm it to me that would be great.

I would like to try to check the most i can on my end before i send it out for you to test to try to figure out if its in the board i bought or something i did

[JamesL]

im having some issues....finally finished up school so i got around to putting it in...plugged it all in and the fuel pump isnt pressurizing....on and off with the key a few times and it did pressurize for like half a second but that was it...the car does crank. i socketed the unit myself and THINK i did it all correctly. i cant really understand the one post on how to check it with the multimeter so if you could pm it to me that would be great.

I would like to try to check the most i can on my end before i send it out for you to test to try to figure out if its in the board i bought or something i did

If you have the board socketed, can you put your original chip back in and try it?

[AzShadow]

No i cant, i followed some instructions online where the guy recommended to just cut the legs flush off at the chip to make it easier to get out....

[turbovanman²]

hmm anybody have a chip you could burn a 90/91 2.5 turbo cal to and send me? I'll pay for cost of chip/shipping.

Yeah, I could, PM me the details.

[pauly_no_van]

haven't had the time to try mine yet

[zin]

haven't had the time to try mine yet

Me neither...

Mike

[Sloride]

My Issues have been completely resolved.... By Far the best customer service I have ever experienced on the boards < no pun intended >

Chris, You ROCK

ps. If your ostrich doesn't seem to be working and your converter checks out, make sure the two little switches on the side are toward the usb connector.

[pauly_no_van]

Just got back from road test.
With 20 psi stock injector/3 bar cal was at 50MPH in no time and hit a speed bump with the following result:


Van caught air! Passenger wet himself....
Thank You Very Much Quantum!
Now to start tuning.....

paul(soon to be arrested)

[moparzrule]

Got mine from Chris a week ago, works perfect! Now all I need is the extender cable from Moates and I don't have to remove the SBEC to change the chip.

[bbernd]

Hello,

ist this project still alive??

I'm interested in one of those converters.

regards
BB

[turbovanman²]

Hello,

ist this project still alive??

I'm interested in one of those converters.

regards
BB

Go to www.boostbutton.com he is selling them now.

[ShelGame]

http://www.boostbutton.com/Chip-Products.html

More specifically, they're near the bottom of the page...

[quantum]

Yeah, I'm pretty much out of the game for now. I just don't have time between family, work, and school. Rob's a great guy and his converter is smaller and most likely better soldered than mine (I never was good with the soldering iron).

Rob if your interested in my schematics for the realtime cal switch with the plcc chips and let me know (PM). The design is sound I just cant solder well enough to make a consistent good version (I have made a couple, and the plcc works with switching on the fly) and I would rather see the design used then sit on the shelf. I know your doing the burnable computers, but this may be a good cheap option for others.

[Reaper1]

subscribed..

[Radiant_Red]

Hey Rob ordered mine today if shipping is too much to Canada ( Windsor ) i can pick it up from you i remember you are not very far at all from me.. Thanks

http://www.boostbutton.com/Chip-Products.html

More specifically, they're near the bottom of the page...

[ShelGame]

I'm a little farther away now. I moved a few years ago. We're just north of Ann Arbor now.

It shouldn't be a problem. The padded mailers I use are only about $0.25 more to go to Canada than the US. Though, I send them 'airmail' - it usually takes 2-3 weeks to get there. I guess they walk it over or something, lol.

[gerbot_3000]

Why didnt you tell me you sell this when i bought the inyectors/PB and stuff

Sounds very interesting, can you make a cable that gets into the cabin so people can erase with a willem the chip to avoid the car being stolen? I dont know if TM's get stolen on USA, but in mexico, is everydays story.