Getting out of Dodge sale!

[90Dodgevnt]

Priorites change and with and impending wedding later this year, something had to go. Anyone interested in parts, and if you send me a PM, **please** type what parts you are interested in the title/header.

Prices do not include shipping. All parts are considered used unless noted. Everything is located in Austin, TX. New link listed below!!


http://buymyparts.blogspot.com

Computer/wiring
1990 2.5 Turbo harness (no injector) $100
1990 Shadow driver/passenger electric mirror/door harness/trunk harness $60
HEP w/Chrysler cap/rotor and Magnecore wires $65 **sale pending**

A/C and cooling
VNT A/C Compressor w/new clutch W/drier (new/never run) $80
VNT A/C lines $20

Custom 4 row Radiator $175 **sale pending** 23x17x3



Alternator $20
A/C bracket $10
Shadow A/C condenser $20
Coolant temp sensor (Chrysler) $20

Suspension


Wheels/Rims
(4) Pumper rims (almost new) $350


(4) Crab rims (good/fair condition) $100


Engine
Bored .20 commonblock w/balance shafts removed/Venolia pistons/Forged crank Approx 90k $500 **sale pending**



Tyler big valve head w/Manley valves/flowsheet $1100 (new)
ARP commonblock studs $40

Intake/Exhaust


Turbo
Turbos Unleashed in line oil filter (new) $50

Transaxle
Cliff Ramsdell Transaxle A-568 (large Spline) w/approx 20k $350 **sale pending**


Fidanza Aluminum flywheel (new) $250

Fuel
Dawes device W/oxygen sensor $80

Intercoolers
Dodge Turbo Cummins $200

Spearco type $200



Misc.
Shadow door panels (Grey w/red stripes) $50
Shadow Accustar Tilt steering column $30


McMaster vacuum block #2 $20


Fidanza Adj. Cam gear $70


K&N cone filter $50

Turbo valve cover (Candy blue) $45


Turbo valve cover (Gloss black) $50
Cherry bomb 3 inch glasspack $40
Shadow leather steering wheel $100 (excellent condition)
Shadow Windshield seal/weatherstriping $30
Shadow armrests (driver/passenger) w/power lock switch $25

Books & scanners

1990 Chrysler Parts book $20
Haynes Dodge Shadow repair book $5 **sale pending**
Popular Mechanics CD w/access code $10

I will also be listing 2.5 mandrel tubing, both stainless and aluminum, scanners, couplers, T-bolt clamps, door seals, door mouldings, and/or a pretty much anything I have purchased in the last 10 years relating to this hobby (except tools).

Any questions, send a PM.

[90Dodgevnt]

Here are the head flow numbers from Tyler.

Big valve head w/manley valves.

Per Tyler:

I checked all the installed heights and lifts and you should be able to run up to a .600" lift cam with no problems. I set the installed height to 1.700”. This will give you about 130lbs on the seat, and 285 open.

Here are the flow numbers.
To show the benefit of the big valve upgrade, I first tested your head after I had completed all of the port work, but before I had taken it to have the larger seats put in. I used a back cut, SS +1mm valves for the test, so it would have been accurate to what the head would have flowed as a +1mm head. The percent gains are still the gain over the stock head.

Flowbench Results:

Intake
Lift - Stock / +1mm / Big Valve - % increase over stock
.100 - 47.3 / 52.5 / 52.5 – 11.0%
.200 - 88.5 / 107.8 / 106.0- 19.8%
.300 - 111.2 / 133.3 / 142.9 – 28.5%
.400 - 127.5 / 153.4 / 162.1 – 27.13%
.450 - 132.3 / 156.3 / 166.9 – 26.2%
.500 - 135.2 / 162.0 / 171.7 – 27.0%
.550 - 135.2 / 163.0 / 175.5 – 29.8%

Exhaust
Lift - Stock / Ported - % increase
.100 - 41.6 / 49.7 / 51.7 – 24.3%
.200 - 71.9 / 82.0 / 90.7 – 26.1%
.300 - 92.1 / 99.3 / 118.0 – 28.1%
.400 - 105.5 / 121.8 / 137.1 – 30.0%
.450 - 107.4 / 131.4 / 142.0 – 32.2%
.500 - 108.4 / 138.1 / 146.7 – 35.3%
.550 - 107.8 / 142.9 / 147.0 – 36.4%

[2.216VTurbo]

PM sent for multiple items, growing up is hard to do isn't it? My wedding cost us $24K and that was 10 years ago Hopefully you have some sponsorship...

[Dez]

Highly interested in the...

Custom Intake Manifold W/52mm TB $150

Pic to casper_213@msn.com, thanks.

[1984rampage]

Heres pics of the intake he just sent me... Hope you dont mind me posting them!

[Captain Chaos]

I'd like the PB bobble strut if its still available.

[1984rampage]

Also, what transaxle is it? A555?

[Captain Chaos]

Large spline sounds like a 523/568.

[90Dodgevnt]

Also, what transaxle is it? A555?

A-568. I updated the listing.

[jl93sundance]

pm sent

[Simsy]

got a pic of the crab rims? also how much shipped to 18508?

[fastasleep]

How much on the short block to 30016?

-Les

[90Dodgevnt]

PM's sent on rims/shortblock.

[jb07]

what year is the cummins intercooler?

[moparzrule]

VNT A/C Compressor w/new clutch W/drier (new/never run) $80
Alternator $20

Would like a pic of the A/C stuff here. And also what alternator is it? Nippo or bosch? Condition?

One other thing, thought I'd ask since you said not everything is listed, do you have a 3 bar MAP sensor for sale?

[90Dodgevnt]

PM sent on the cummins.

I do have the 3 bar map, but it's currently on the vehicle. If the it does not sell within a few weeks, the car will be stripped and scrapped, and anything on the car (check the for sale listing) will be listed for sale shortly after.

I'll have to get back to you on the alternator, as I have no idea which one it is, and I'll get pics of the a/c stuff as well. Wed/thurs.

[WickedShelby88]

Would the TU turbo lines fit a T3 as well?

[90Dodgevnt]

Per TU's site:

It can be used in the following applications:

Any 8-Valve TC Maserati
'84 to '87 Chrysler TI Non-Intercooled Garrett Turbochargers
'86 to '89 Chrysler
Shelby TII Intercooled Garrett Turbochargers
All Garrett Hybrid Turbochargers using Stock Exhaust Manifold or TU Hybrid Header.

This kit makes install a breeze. Detailed instructions and photos are also provided. This kit is for Chrysler TI/TII/or Hybrid Garrett Style Turbochargers only

[djtang]

Is the TU Header cast iron? Does it come with the oil and coolant line extensions?

[90Dodgevnt]

Is the TU Header cast iron? Does it come with the oil and coolant line extensions?

It's the newer version, not the old welded "l" version. Still in the box w/all the pieces directly from TU. Never installed or fitted/modified.