Page 1 of 3 123 LastLast
Results 1 to 20 of 45

Thread: TU's Stuff Highly recommended!

  1. #1
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    TU's Stuff Highly recommended!

    Just installed one of TU's new 4 pucks with larger disc and "purple" plate. Pedal feel is better than stock and it seems to hold the power just fine on my car making over 500ft/lbs. I did have a slight spline issue like someone else on this site had, but 20min and a file and it was cured. Chris says the new supplier will solve this fittiment problem. I also installed one of their 3in down pipes and the fit and finish was PERFECT, couldnt ask for any better....same with the steel braided oil feed line from them. Thanks for all the help Chris.

    Luke..

  2. #2
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    Nice, 500lbsft? Awesome, care to share the dyno sheet, I'd love to see how nice and fat that area under the graph must look

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  3. #3
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    Re: TU's Stuff Highly recommended!

    I cant post a attatchment.....Im sure you read about the car. 86 GLHS #065 535HP/539ft/lb Tq.
    8 Valve
    Ring a bell?

  4. #4

    Re: TU's Stuff Highly recommended!

    He's lying, I was there for the pulls, my convertible lebaron made twice as much as Luke's car.

    I could be wrong though, maybe it was the other way around.
    Glad it is together, is the clutch noisy?
    I have the TU 6 puck/yellow plate and that thing grabs
    and holds!

  5. #5
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    Re: TU's Stuff Highly recommended!

    Sorry I cant hear the clutch over my new ball bearing turbo sounding like a hair dryer under the dash

  6. #6
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by SUPER60omni View Post
    I cant post a attatchment.....Im sure you read about the car. 86 GLHS #065 535HP/539ft/lb Tq.
    8 Valve
    Ring a bell?
    Ding, coming back now

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    Bristol, CT
    Posts
    2,722

    Re: TU's Stuff Highly recommended!

    Nice to know Luke. Probably going to the purple plate myself for my next one.

  8. #8
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by Turbo3Iroc View Post
    Nice to know Luke. Probably going to the purple plate myself for my next one.

    You will love the pedal pressure. Hey if your around some day this week I will come show you it and take you for a ride in a FAST GLHS!........hahahaha just playin, I love your GLHS.

  9. #9
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by SUPER60omni View Post
    I cant post a attatchment.....Im sure you read about the car. 86 GLHS #065 535HP/539ft/lb Tq.
    8 Valve
    Ring a bell?
    Nope, no bell, but sounds cool! What's your best 1/4 mile with it?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  10. #10
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by BadAssPerformance View Post
    Nope, no bell, but sounds cool! What's your best 1/4 mile with it?
    http://www.turbo-mopar.com/forums/sh...ad.php?t=27891

    I remember it because he just kinda matter of factly dropped in on this thread and we were all like "HUH, WTF?" After that the thread kinda turned into a benefits of a 65 shot of nitrous on a turbo motor thread but some great nitrous info is in there. I'll no doubt read it back thru before Cincy this year

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  11. #11
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: TU's Stuff Highly recommended!

    OK, that sounds familiar now...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  12. #12
    turbo addict
    Join Date
    Jul 2007
    Location
    Sioux Falls, SD
    Posts
    1,593

    Re: TU's Stuff Highly recommended!

    I also have had nothing but good experiences with chris, I ordered his 3in turbo back exhaust kit, fit was good, needed some tweaking but for it not being made 'on the car' at a shop very nice. My 6puc blue pp holds great. cant wait to order my new 83lbs injectors and moly plate from him

  13. #13
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by BadAssPerformance View Post
    Nope, no bell, but sounds cool! What's your best 1/4 mile with it?
    The same setup (minus custom length aluminum rods and spray) was in my silver GLHT and it went 11.92 with a tranny that wouldnt go in 2nd above 4grand. Have not had a chance to get to the track with this car yet. Im waiting tho....im ready...

  14. #14
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: TU's Stuff Highly recommended!

    +1 for TU's clutches, I have a 6 puck/blue plate in my daily driver and I had a 4 puck/blue plate in my shadow which had about 400 ft/lbs when I had the 2.5 in it.
    Pedal feel is firm but nice and easy, engagement is not anything near as on/off as I thought it was going to be.

  15. #15
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by SUPER60omni View Post
    The same setup (minus custom length aluminum rods and spray) was in my silver GLHT and it went 11.92 with a tranny that wouldnt go in 2nd above 4grand. Have not had a chance to get to the track with this car yet. Im waiting tho....im ready...
    Cool, let us know when you run it

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  16. #16
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    I think JT in his PC-correctness as a mod here just asked you to put your money where your mouth is super60

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  17. #17
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    Since this kinda turned into a 'what TU clutch are you running thread' I'll chime in on that too with a small admission.

    Couple years ago when I bought a TU yellow plate/6 puck, I could not find any external differences with a stock PP cover (other than that lovely yellow color) I was suspicious of the claims so I kept it on the shelf until the Rampage was ready for it's new hybrid trans last weekend. In the meantime, I did have the clutch checked out (as it turns out sheerly by coincidence by the guy who built it for TU, what are the odds) Turns out there ARE plenty of mods under the cover, machining, changing of pivot point, that kind of thing that creates the increased clamping force. It is in fact, right about 40% more clamp than stock (slighty more on the PP tester actually).

    I wanted a clutch that will hold but also engage stock-ish, too many hateable clutches have been in my projects over the years So I combined the PP with a stock disc, yes I measured the thickness VS the 6 puck they are within .005-.007 (a little more with the Marcel compressed) so I think it should be fine. After about 75 miles it is working perfectly and I almost never say that about a clutch. They are almost always too much/too sudden/ too harsh/not enough or some other problem. I am liking what I have but will reserve the final opinion until after Mopars at The Strip in 8 days. If the clutch holds the 8.5" slicks, I'll be stoked

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

  18. #18
    Garrett booster
    Join Date
    Apr 2007
    Location
    CT
    Posts
    142

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by 2.216VTurbo View Post
    I think JT in his PC-correctness as a mod here just asked you to put your money where your mouth is super60
    I will be more than glad to do so. I wish it wasnt 28 deg. here! I would be at the track if it was like 55ish.

  19. #19
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by SUPER60omni View Post
    I will be more than glad to do so. I wish it wasnt 28 deg. here! I would be at the track if it was like 55ish.
    LOL, I think Alan was putting some words in my mouth there but cant wait to hear what it runs! Heck, cant wait to get to the track myself!!!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #20
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: TU's Stuff Highly recommended!

    Quote Originally Posted by BadAssPerformance View Post
    LOL, I think Alan was putting some words in my mouth there but cant wait to hear what it runs! Heck, cant wait to get to the track myself!!!

    More JT PC... You were more fun when you were just a regular pot stirring Joe here like the rest of us

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL

Page 1 of 3 123 LastLast

Similar Threads

  1. Replies: 28
    Last Post: 09-16-2007, 11:50 PM
  2. cleaning out garage, lots of stuff, CHEAP!!
    By mattn124 in forum Parts For Sale
    Replies: 6
    Last Post: 06-14-2007, 10:44 PM
  3. Replies: 10
    Last Post: 05-24-2007, 10:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •