Hey guys, I'm looking for a set of titanium retainers that will work with my MP813 springs.
Hey guys, I'm looking for a set of titanium retainers that will work with my MP813 springs.
contact BadFastGTC (Steve Menegon) on the board
or if your looking for the old design Mopar Performance ones Mancini Racing has them in their clearance section
10's AGAIN '07, '08, '09
TFB Fabrications custom billet machined parts for you Turbo Mopar
+1, you can have the Mopar ones ordered from any dealer or somewhere online. But might as well support the board members and get a set from Steve.
Next question... how come you are wanting set of titanium retainers for use with 813 springs?
Steve Menegon
1989 T2 GTC (Sledgehammer)
11.872@120.21
1987 Shelby Lancer #574 - 13.79@104.65
2005 SRT4 ACR (Mamba) 12.612@110.96 (Now Junk)
2016 200S (The Silver Billet) 14.70@92.7
Before I spend hours searching, whats wrong with the 813 spring?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
The spring isn't much different than the factory turbo spring. I tried these once and they gave up as fast as the 061 spring. My car wouldn't run past 5200 rpm and "since I put in new springs", I concluded they couldn't be the cause and chased my tail for some time trying to solve a problem I had just installed! Really pi$$ed me off.....................
Steve Menegon
1989 T2 GTC (Sledgehammer)
11.872@120.21
1987 Shelby Lancer #574 - 13.79@104.65
2005 SRT4 ACR (Mamba) 12.612@110.96 (Now Junk)
2016 200S (The Silver Billet) 14.70@92.7