About a month ago, on snowy roads, I took a corner way too fast and ran into (and mostly over) a large ice pile with a bit of snow on it. I noticed a few days later that with every throttle movement there was a clunk. I sheared off the front mount bolt, tore out another mount stud from the lower rad support, and overall, did a real number on the poor old commuter.
So knowing that swapping rad supports would be a huge pain, I decided to make up a brace, that will be bolted in later today. It will fit around the lower rad support beam and I'll have to drill 2 holes and bolt it on. Other than that, it's a fairly simple bit of fabricating. I just thought I'd share in case your neon has had similar problems. Fear not. We have the technology, we can rebuild him.