BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

[Juggy]

Don't die Cordes!

Timing will determine if it is an A-B in 2010 or if I just use the baseline of 100+ timeslips from the Shadow in its current configuration.

A- B is always nice. but honestly with your shad prolly being as consistent as I think it is, there shouldnt be any real need for any other type of testing. real world track gains r enuff to please me. and if makes mo power on a stockish setup like that, imagine what it will do for those running a more hipo setup

[BadAssPerformance]

i really don't care for the testing i can do that myself just the test fit with PS is all i need
i just need this very soon as motor is starting to go back together and I'm ruining out of time

Yeah its gonna be a while, you might be out of time if yer looking to run by spring. The prototype did fit with PS however needs to be flycut and one pipe masassged to fit one header bolt.

A- B is always nice. but honestly with your shad prolly being as consistent as I think it is, there shouldnt be any real need for any other type of testing. real world track gains r enuff to please me. and if makes mo power on a stockish setup like that, imagine what it will do for those running a more hipo setup

Yeah thats what I was thinking, I got a stack of 13.0's at 102-104 mph

[4cefedomni]

I just got my bottom end together today and bolted the head on. So I'm getting really close to needing a header too.

[turbovanman²]

Yeah its gonna be a while, you might be out of time if yer looking to run by spring. The prototype did fit with PS however needs to be flycut and one pipe masassged to fit one header bolt.

Maybe see if people want it as is, and what about using the ZF pump, it gives alot more room.

I honestly see testing as pointless for the sale, people want them,

[8valves]

I bet it's no better than a ported stocker. :-P

[Captain Chaos]

I bet it's no better than a ported stocker. :-P

[BadAssPerformance]

Maybe see if people want it as is, and what about using the ZF pump, it gives alot more room.

I honestly see testing as pointless for the sale, people want them,

As-is it wont bolt on yet... but it clears both pumps.

One way or another, it will be tested on the Shadow...

[BadAssPerformance]

I bet it's no better than a ported stocker. :-P

Hey, thats for the other thread

[Badger]

ok so it clears the p/s pump(s)...anything else theres an issue with? Will you still be able to have an operational heater, defrost,.....not that its a deal breaker but what about the A/C?

[BadAssPerformance]

Both heater core and A/C hook up are nowhere near the header.

[4cefedomni]

Bump any updates?

[Juggy]

B
i
g

b
o
o
t
y

b
u
m
p
!
!
!

[4cefedomni]

I don't think it's gonna happen anymore Havn't gotten an update in a long time.
I'm probably just gonna get someone local to build me one cause I'm gonna need it soon.

[black86glhs]

JT....put the crack pipe down and get to work!!!
What is up with the header, bud?

[BadAssPerformance]

I don't think it's gonna happen anymore Havn't gotten an update in a long time.
I'm probably just gonna get someone local to build me one cause I'm gonna need it soon.

JT....put the crack pipe down and get to work!!!
What is up with the header, bud?

If you need one soon... do what you have to. Since the decision was made to test it, everything screeched to a halt. Not to mention the SS prototype still needs mods to fit.

I have also had a lot of changes in my personal life that I really dont care to get into here.

So will it happen? yes. When? please be patient.

[black86glhs]

If you need one soon... do what you have to. Since the decision was made to test it, everything screeched to a halt. Not to mention the SS prototype still needs mods to fit.

I have also had a lot of changes in my personal life that I really dont care to get into here.

So will it happen? yes. When? please be patient.

I am being patient, just bustin your chops.

[bakes]

Still making this JT

[BadAssPerformance]

Thats the plan... still need to modify the one runner to make it fit, then get it on the Shadow to test.

[turbovanman²]

Thats the plan... still need to modify the one runner to make it fit, then get it on the Shadow to test.

Why test? just make them now and make testing an option, I bet most will take header now and testing later,

[bakes]

I will test it for ya , im not worried about the Data .