Page 2 of 20 FirstFirst 12345612 ... LastLast
Results 21 to 40 of 388

Thread: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

  1. #21
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by Juggy View Post
    whats the flange thickness at the head???? looks to be 5/16 or 3/8 at most

    I see the flange has not been seperated between the ports?? is this thing going to bend n flex? warping the initial surface???

    BTW looks great!! if i have/had money id be all over it....and yes aaron is right about the group buy section, it doesnt get the exposure it should!

    edit: how much space was between the L body firewall and t4 comp housing???? think a GT30R could fit back there with this?
    The head flange started out as 1/4" and due to some warpage during welding I surface ground it completely flat. on one end it is only 1/8"! but amazingly enough it worked fine and never really warped enough that it could not be bolted flat. Eventually after many 30psi (intake so what 60 in the header?) runs it did start leaking a little on the ends but nothing you could hear. As stated the copies will be 1/2" flanges.

    Very close to the firewall with the E cover, Thermotec on the firewall recomended.
    Last edited by BadAssPerformance; 02-16-2009 at 02:48 PM.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  2. #22
    turbo addict
    Join Date
    Nov 2006
    Location
    san diego, california
    Posts
    1,548

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    how bout an option of external wastegate?

  3. #23
    turbo addict BIG PSI's Avatar
    Join Date
    Dec 2005
    Location
    NE Ohio
    Posts
    1,647

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    I am very impressed with the header.
    Just like I was impressed with Aaron's Header.

    Now if JT could OFFER all the extra pieces needed to help make it more of a bolt on I to would interested in one.

    Chuck

  4. #24
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    After many requests, all posts not related to the group buy moved here.

    http://www.turbo-mopar.com/forums/sh...ad.php?t=34601

    Lets keep this thread on topic please.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  5. #25
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by OmniLuvr View Post
    how bout an option of external wastegate?
    That would be hard to package with everything else in the way plumbed off the collector like it would want to be done. For mounting an external gate with this header, you could make a custom downpipe and using the WG hole turbine housing. If you are looking for more... 8valves can make full race headers

    Quote Originally Posted by BIG PSI View Post
    I am very impressed with the header.
    Just like I was impressed with Aaron's Header.

    Now if JT could OFFER all the extra pieces needed to help make it more of a bolt on I to would interested in one.

    Chuck
    Thanks Chuck. I am thinking about offering that but know how alot of the DIY T-Mers like to roll... Also the oil return to the oil pan will possibly need to be routed differently per the car and axle combo that is in it so not easy to spec out precisely.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  6. #26
    turbo addict
    Join Date
    Nov 2006
    Location
    san diego, california
    Posts
    1,548

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    yeah, i agree, theres a lot going on around that collector, and i thought there would be more room in between the header and intake, pretty tight for an external. i like the turbine hole wastegate idea, im trying to build one right now.

  7. #27
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    OK...I'm going to post here as well...

    If I could scrounge up the $$$, then I'd HIGHLY consider running one of these headers. I think for what I want to try and accomplish and my performance goals, this part would work nicely.

  8. #28
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    For those interested, how important is it that you can use the stock type SV housing, since you would have to make your own downpipe anyways?

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  9. #29
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Sylmar, CA
    Posts
    2,584

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by BadAssPerformance View Post
    For those interested, how important is it that you can use the stock type SV housing, since you would have to make your own downpipe anyways?
    I'd rather not have to buy a different SV to make it work but if it's necessary for L body clearance . . . . or similar engineering/fit cause, then OK.
    John Laing

    "The sole condition which is required in order to succeed in centralizing the supreme power in a democratic community, is to love equality, or to get men to believe you love it. Thus the science of despotism, which was once so complex is simplified, and reduced . . . . to a single principle."
    -- Alexis de Tocqueville

    "One of the methods used by statists to destroy capitalism consists in establishing controls that tie a given industry hand and foot, making it unable to solve its problems, then declaring that freedom has failed and stronger controls are necessary."
    --Ayn Rand

    "To evolve, you don't need a Constitution. All you need is a legislature and a ballot box . . . . things will evolve as much as you want. All of these changes can come about democratically; you don't need a Constitution to do that and it's not the function of a Constitution to do that."
    -- Justice Antonin Scalia

  10. #30
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Honestly, I don't really care TOO much, but it would be nice to be able to use a stock-type SV assembly like TU's. However if that's not possible, then going with an external set-up would be my next move and I'd use a V-band for the DP. My only question then would be what to do about taking up for engine movement? Even though I run all poly mounts and a solid bobble, it still moves a little, so are we talking having to use a bellows assembly or what?

    If it is suggested to go to an external wastegate set-up, is there going to be a provision to do that?

  11. #31

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    I would prefer to use stock parts, in terms of the SW. So because I want this, it must be so. Thank you.
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  12. #32
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by Reaper1 View Post
    Honestly, I don't really care TOO much, but it would be nice to be able to use a stock-type SV assembly like TU's. However if that's not possible, then going with an external set-up would be my next move and I'd use a V-band for the DP. My only question then would be what to do about taking up for engine movement? Even though I run all poly mounts and a solid bobble, it still moves a little, so are we talking having to use a bellows assembly or what?

    If it is suggested to go to an external wastegate set-up, is there going to be a provision to do that?
    If not running the stock SV, you use some flex hose, like so-

    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  13. #33
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by minigts View Post
    i would prefer to use stock parts, in terms of the sw. So because i want this, it must be so. Thank you. :d
    lol

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #34
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by turbovanman View Post
    If not running the stock SV, you use some flex hose, like so-
    or solid motor mounts

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  15. #35
    turbo addict
    Join Date
    Jan 2006
    Location
    Hazelwood, MO
    Posts
    6,566

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Well, as I've said I've got ALL poly mounts AND the solid bobble(the tranny mount is the "race" version). I figured it would require some bellows, and that doesn't bother me, just wanted to make sure...

  16. #36
    Hybrid booster 4cefedomni's Avatar
    Join Date
    Mar 2006
    Location
    Delta B.C. Canada
    Posts
    694

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    If I provided you guys with a flange for a different turbo would it be possible for you to put it on instead of the chrysler flange?
    you can't polish a turd! [COLOR="Red"][FONT="Arial Black"][/FONT][/COLOR]13.67@100.11

  17. #37
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by 4cefedomni View Post
    If I provided you guys with a flange for a different turbo would it be possible for you to put it on instead of the chrysler flange?
    That might be a possibility but we could not gaurantee fitment of a different turbo with respect to the firewall, started, power steering, etc...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  18. #38
    turbo addict
    Join Date
    Mar 2008
    Location
    Fort Wayne, IN
    Posts
    2,642

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    When will people relize that swingvavles SUCK anyways.

    90 degree 02 housing with v-band FTW!!!

  19. #39
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,688

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    True, that is the best fro performance, however, that requires an external wastegate and even more fab... The 3" SV's available do a nice job.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  20. #40
    Supporting Member Turbo Mopar Contributor "Top Fuel" Bender's Avatar
    Join Date
    Mar 2006
    Location
    Hellertown,Pa
    Posts
    1,962

    Re: BadAss 2.2L/2.5L Equal Length Runner Tubular Header Group Buy

    Quote Originally Posted by Mopar318 View Post
    When will people relize that swingvavles SUCK anyways.

    90 degree 02 housing with v-band FTW!!!
    I've been saying this for years
    Now if I can get people to use dual port wastegate cans or better yet external wastegates my mission will be complete
    10's AGAIN '07, '08, '09
    TFB Fabrications custom billet machined parts for you Turbo Mopar

Page 2 of 20 FirstFirst 12345612 ... LastLast

Similar Threads

  1. Replies: 434
    Last Post: 05-25-2012, 07:48 PM
  2. Intermediate axle for equal length set up
    By Xtrempickup in forum Transmission
    Replies: 12
    Last Post: 02-15-2009, 01:36 PM
  3. 2.4L intake runner length discussion
    By BadAssPerformance in forum Engine - Block, Piston, Heads, Intakes
    Replies: 36
    Last Post: 06-17-2007, 01:08 PM
  4. Finally maybe an equal length header?!
    By LynX853 in forum Exhaust
    Replies: 57
    Last Post: 08-28-2006, 12:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •