ok i have some wires here that i need to clarify where they all go since the 88 omni dash harness has some differences to the 86 sc wiring. the smec conversion is not going horrible other than these few things.
the first is the dark blue/orange wire and the black wire that go on the back side of the heater control. whichone goes on top and which one goes on the bottom on the 88 omni dash wiring
[IMG][/IMG]
[IMG][/IMG]
the next is the blackwire with white tracer as shown below in the drivers side kick panel it runs toward the back along and under the the carpet toward the back lights. this was in the 86 charger dash harness and is not included on the 88 dash harness wiring. the 88 dash harness wiring also does not use the hatch release and that does not concern me but if this is to the lights i would need to know
[IMG][/IMG]86 harness
[IMG][/IMG]86 charger kick panel