do the poly bushing press in from the front or rear (omni, so front bushing)?
It looks on Johnny's site like he switches control arms half way through...at first he is removing the driver side, then when he presses the bushing in, it looks like the passenger control arm.
Last edited by t3rse; 01-16-2009 at 06:50 PM.
alright so how about this...
http://www.polybushings.com/pages/one3.html
correct me if I am wrong
fig 11 and 12 are of the passenger side
fig 15 and 16 are the driver
Is this correct? I know it says that the bushing pushes in from inside the a arm, so this would mean that 15 and 16 are the driver....see how I am confusing myself?
Posting Permissions
Reply With Quote