clutches for sale

[85glht]

Both are sold....... sorry.


First one I have is a Mcleod rev loc unit. It has maybe 150 miles on it. It is in great shape. I'm looking for $200 for it plus shipping



Next one is a dual diaphram pressure plate and four puck clutch from TU. It works great................. but the pedal pressure it VERY firm. I cringed every time I pushed in the clutch pedal, praying that my cable would not snap. Fortunately it never did but I grew tired of driving the car with this clutch. It has plenty of life left in it and will not slip due to the heavy pressure plate. i would like $150 for it plus shipping


Both of these clutches are for the 555, etc transmissions.

I do take paypal.

Thanks.


Both of these clutches are sold!!

[shelbyplaya]

large or small spline? I really want the rev-lock. Trades?

[turbovanman²]

large or small spline? I really want the rev-lock. Trades?

+2, interested in the disc only for the 4 puck if large spline and if you want to seperate.

[tryingbe]

A555 = smaller shaft 18 spline

[shelbyplaya]

A555 = smaller shaft 18 spline

I missed that part.... slight over sight

[turbovanman²]

A555 = smaller shaft 18 spline

I saw the 555 but I thought some were large spline?

[Chris W]

I saw the 555 but I thought some were large spline?

Only the 568/523s came with both large and small spline.

Chris-TU

[turbovanman²]

Only the 568/523s came with both large and small spline.

Chris-TU

Thanks for the info,

[black86glhs]

Thanks for the info,

I thought everyone knew about 91 and up large spline trans??? Damn Simon, LOL!!
Oh and that the 555 were all small spline.

[boost geek]

Wish I had the cash or I would grab it...

[turbovanman²]

I thought everyone knew about 91 and up large spline trans??? Damn Simon, LOL!!
Oh and that the 555 were all small spline.

Auto's are my bag, but I thought 555's had large spline too, but I guess not, lol!

[tsiconquest88]

i knew that but only cus i was told recently lol.

[gti_7]

hi guys-any one know what sort of torque these clutches will handle in a 3Klbs car? also-compared to the 4 puck, what was the pedal feel like on the mcleod?
thanks!
bernie

[mopar3.0]

can i use eiather one of thoes pressure plates for my 523?

[moparzrule]

hi guys-any one know what sort of torque these clutches will handle in a 3Klbs car? also-compared to the 4 puck, what was the pedal feel like on the mcleod?
thanks!
bernie

Call Chris at TU for clutch advice. 602-762-6678

The McCleod rev-lok uses a stock T3 pressure plate.

[Chris W]

I believe the OP has sold both clutches based on his edited comments in Post #1.

Both of these clutches are sold!!

We can assist you in matching one of our clutches to your application. Don't hesitate to give us a call so we can go over a few things first.

Chris-TU