Results 1 to 6 of 6

Thread: 1985 L-body turbo 1 LM pin outs

  1. #1
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,015

    1985 L-body turbo 1 LM pin outs

    Hey all, I have been looking for a pinout list for my 1985 turbo 1 red and blue connectors. I need this to cross reference to the listing I have for a 86 turbo 1 and an 87 turbo II. There doesn't seem to be one on the Dodge Garage or Knise MiniMopar site. Can anyone help?
    thanks, jeff1234
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  2. #2
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: 1985 L-body turbo 1 LM pin outs

    Have you tried comparing what you have to the 86 pin outs which are listed? I always thought that the wiring was the same from 85 to 86 at the TI LM?


    ETA: This is always a handy link.

  3. #3
    Hybrid booster
    Join Date
    Jan 2007
    Location
    Batavia, Ohio
    Posts
    927

    Re: 1985 L-body turbo 1 LM pin outs

    I can scan my 85 service manual for you. I was actually looking at it today because I'm in the middle of a t2 swap on my 85 glh. PM or post your e-mail and ill send it to you.

  4. #4
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,015

    Re: 1985 L-body turbo 1 LM pin outs

    Hello cordes and jamesmonty, I also though that I was told at one time that they were the same. I have tried comparing today and they look pretty much the same except for changes in the AIS and a few deletions. james, a PM coming your way, Thanks, jeff1234
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

  5. #5
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 1985 L-body turbo 1 LM pin outs

    There are some threads about the swap from T1 to TII, if thats what you need, I can dig them up.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  6. #6
    Supporting Member II Turbo Mopar Contributor jeff1234's Avatar
    Join Date
    Mar 2006
    Location
    Albany Wisconsin
    Posts
    1,015

    Re: 1985 L-body turbo 1 LM pin outs

    TVM, thanks for your response. I have already downloaded alot of stuff. I am real close to starting to work on the L/M so I am compiling everything I can find. Its an exercise that also helps me understand more about whats going on with these cars. I have been working on this thing forever and right now when ever the temp is above 10=15 degree's I go out to the garage and do a little here a little there. I have gotten lots of suspension items, struts shocks polystuff ect so I have plenty to do and spring is coming. About 118 days. YUK
    jeff1234
    The only substitute for cubic inches is cubic dollars, how fast can you afford to go?

Similar Threads

  1. For Sale 1985 Dodge Omni GLH Turbo Sante Fe Blue LOTTA PICS
    By ACRucrazy in forum Cars
    Replies: 22
    Last Post: 08-25-2011, 09:42 PM
  2. WTB: L body turbo parts car!
    By Phreakish in forum Cars
    Replies: 2
    Last Post: 01-22-2007, 01:14 AM
  3. 87 Mopar Perf LM pin out???
    By Mike_Shepard in forum Electrical & Fuel System
    Replies: 7
    Last Post: 08-28-2006, 11:25 AM
  4. Going 86 TII to 87 TII anyone know the pin outs?
    By DodgeZ in forum Electrical & Fuel System
    Replies: 7
    Last Post: 05-25-2006, 09:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •