i have a 89 t2 shadow engine harness ,my question is will an 88 or 87 interior harness have the same bulkhead connectors and plug right in .any help is great .
89 interior harness-will it fit an 87/88?
i have a 89 t2 shadow engine harness ,my question is will an 88 or 87 interior harness have the same bulkhead connectors and plug right in .any help is great .
Re: 89 interior harness
thanks for all the help guys
I altered the title for you. I wish I could help but I honestly don't know.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
May want to verify what your harness is out of as well, 89 turbo Shadows were only available as 2.5TI, or 2.2TIV (CSX). TII wasn't ever an option on a Shadow.
I've got 87's 88's and an 89, but I cant remember what the ends of the bulkhead plugs look like under the dash, never pulled the harnesses out of any of my P-bodies.
Dave Tekampe
Director SDAC National
VP SDAC-Chicago
85 GLH-Turbo (DC intercooled)
86 GLHS #107
87 GLHS #148
87 CSX #161, #608, #674
88 CSX-T #529, #541
89 Shadow Competition Package and lots more...
thanx for the help guys now im alittle confused on what i actully have ,any ideas on how to figure out what harness i have and will it work for a 2.2
i had a 87 shadow and still have the harness in the cellar there is no bulkhead connector it goes right into the car. how many connectors on the module in the engine bay ? do you have a module in the passengers side kick panel ?
Norm
i dont recall id have to take a ride to the garage to see ,i mess with this car when i can so the times i work on it is far in between id have to take a look
I am working on my 89 csx. I have to replace the dash harness and I am doing it with a 88 turbo dash harness and they have the same type of plugs. The only one missing is for a plug for the heater box. So if you have a Shadow engine wire harness then I would say yes. Hope this helps.
Steve B
Reply With Quote
