Anyone have a picture of the pins that go into the connectors of a logic module? I'm doing a T2 conversion and want to see if its a part that can be found on digikey, or if it's proprietary and I need to find some in a JY.
Thanks!
-Dan-
Anyone have a picture of the pins that go into the connectors of a logic module? I'm doing a T2 conversion and want to see if its a part that can be found on digikey, or if it's proprietary and I need to find some in a JY.
Thanks!
-Dan-
There was some link posted not too long ago where someone found all the pins for our cars, I'd have to find it. But I believe they're the same as the ones for the stereo connectors.
Yeah, if you grab a stereo harness plug for your car, it has the "pins" (I think they are female and therefore are not a pin) you need
Go to the junk yard with a set of pliers and cut the connector off the wire harness.
later Dick Westerhof
Heres the info you want http://www.knizefamily.net/minimopar/
So, it looks like This Catalog (scroll down and click on pages 134-209) and go to page 25 of the PDF. Find this:
I'm fairly certain that is the correct connecter. And I'll bet that a box of 25 of them will be much cheaper than 6.99 EACH at Advance
That is the place. Great prices and darn near just about every connector known to Ma Mopar.
Bryan
86 GLHS #161, 2016 Impala
SDAC National Member, SDAC Buckeye Chapter Member
A man has got to know his limitations.....
$12 at thecliplink
Good work guys, I failed to find it.
Actually, we should make this a sticky IMHO.
Thanks guys!
I agree, this would be a great sticky
-Dan-
it would make an even better knowledge center article.
Brian
Originally Posted by turbovanman
How do we make that happen?
[SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]
go to the KC and write an article and post the links in it. ill approve it.
Brian
Originally Posted by turbovanman