Results 1 to 7 of 7

Thread: 3.5 V6 Trans Bolt Pattern

  1. #1
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Horseheads, NY
    Posts
    6

    Question 3.5 V6 Trans Bolt Pattern

    Sort of an oddball question - but does anyone know off hand what the trans bolt pattern of a 3.5 V6 (LH body Intrepid motor) would bolt up to for a 5 speed trans? Or what transverse automatic transmissions it may bolt up to?

    Basis of the question - Contemplating a 3.5 V6 Neon.. I have an old intrepid with a good motor, and I've got a Neon.. Thinking this might be as much fun as my old V8 S10.

    I'm sure I can fab all the mounts and figure out a computer setup for it, but just trying to figure out what my tranny options are..

    Thanks,
    Steve

  2. #2
    turbo addict JDAWG's Avatar
    Join Date
    Dec 2005
    Location
    Hagerstown, Maryland, United S
    Posts
    2,494

    Re: 3.5 V6 Trans Bolt Pattern

    look around dodgeintrepid.net, not sure what manual trans you could use but there is alway an autostick option

  3. #3
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    Re: 3.5 V6 Trans Bolt Pattern

    Quote Originally Posted by steve View Post
    Sort of an oddball question - but does anyone know off hand what the trans bolt pattern of a 3.5 V6 (LH body Intrepid motor) would bolt up to for a 5 speed trans? Or what transverse automatic transmissions it may bolt up to?

    Basis of the question - Contemplating a 3.5 V6 Neon.. I have an old intrepid with a good motor, and I've got a Neon.. Thinking this might be as much fun as my old V8 S10.

    I'm sure I can fab all the mounts and figure out a computer setup for it, but just trying to figure out what my tranny options are..

    Thanks,
    Steve

    Steve not sure about what 5spd if any would bolt up but I would look into the issue of room I have seem 3.0L in neons and they are tight fit and 3.5L is a lot wider motor it would be a tight fit.

    "I'll give you anything you'll ever need and I'll find a way to turn you into a monster."

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanman²'s Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 3.5 V6 Trans Bolt Pattern

    A 3.5 is stupid wide, I doubt it will fit in a FWD Neon engine bay, maybe RWD,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  5. #5
    Mitsu booster
    Join Date
    Dec 2005
    Location
    Horseheads, NY
    Posts
    6

    Re: 3.5 V6 Trans Bolt Pattern

    Yeah, unfortunantly I am finding that out. I had both cars around this weekend and according to my calibrated eye, it just isn't gonna fit transversly. If I take the time to go RWD... lol it's gonna be a Hemi!

    Thanks All!

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanman²'s Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 3.5 V6 Trans Bolt Pattern

    Quote Originally Posted by steve View Post
    Yeah, unfortunantly I am finding that out. I had both cars around this weekend and according to my calibrated eye, it just isn't gonna fit transversly. If I take the time to go RWD... lol it's gonna be a Hemi!

    Thanks All!
    Well technically, the 3.5 is a Hemi,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: 3.5 V6 Trans Bolt Pattern

    only 5spd that will bolt to it is a t-850 out of a 2.7 v6 car. pretty rare.

    you can also bolt it straight up to a 3.3/3.8 604, tho... .. . .

Similar Threads

  1. Suspension 91 and up hubs 5x100 bolt pattern needed ASAP
    By minigts in forum Parts Wanted
    Replies: 4
    Last Post: 08-09-2008, 11:33 AM
  2. Wheels/Tires 1 pair rear crager mopar small bolt pattern
    By thefitisgay in forum Parts For Sale
    Replies: 4
    Last Post: 02-04-2008, 01:25 PM
  3. 8v - 16v bolt pattern
    By Dave in forum 16v Factory Engines
    Replies: 11
    Last Post: 09-21-2007, 11:39 PM
  4. fiat bolt pattern
    By mightyss in forum Suspension, Brakes, Wheels, Traction
    Replies: 1
    Last Post: 05-06-2007, 10:12 AM
  5. What is the Bolt Pattern of my car? -------- Converted
    By fleckster in forum Old FAQ Info
    Replies: 3
    Last Post: 11-03-2006, 12:54 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •