1990-93 J-body traveler install into G-body.

[Turbo_Rampage]

Hey, i just picked up a 2 button traveler from a 1991 Lebaron, and i'm going to install it into my 1990 Daytona Shelby. I have one question on the install though... It doesn't mention in this write-up where pin# 5 goes? It's a pink wire. Would it be constant power? or not used at all? Here is the link- http://home.comcast.net/~my89shelby/traveler.html (on the 5th picture down on this page you can see the pink wire, so i have the same plug)

Does anyone have a FSM that they could look this up in?

Any help would be greatly appreciated.

[Turbo_Rampage]

[TopDollar69]

Pink is usually constant 12V is my memory serves me correctly. I can look it up for you on Monday when I get home if you bump the thread to remind me.

[thefitisgay]

shouldnt the plug just be stuffed up in there?

[J&H Ryan]

shouldnt the plug just be stuffed up in there?

Short answer: no

Longer answer:

By 90, they had gone to option package specific harnesses. If you did not have that option, you did not have that plug.

I did this mod in my lebaron (92). Its a worthwhile little thing to do.

[TopDollar69]

It looks like you got it figured out already, but I just confirmed in my FSM that pink is the constant 12V.