Log works 2 and XD-16 disagree???

[shelbymopar89]

Last night while watching the logworks 2 virtial gauge on the laptop it did not agree with the reading on the XD-16. It was consistently about 1.5 A/F higher that the XD-16. If the 16 was reading 13.5 log works would be reading 15.0 or so. I made sure it was selected for gasoline (14.7) Am I doing something wrong? Which one do I tune by, or should they be the same. Any ideas? Thanks
Brent

[shelbymopar89]

Ok, called tech line and got it figured out. Sometimes the LC-1 gets a little confused I guess. All I had to do was to disconnect the XD-16 and hook the LC-1 up to the puter. Open LM programer reselect gasoline and recal the unit. Took like 5 min and all is well.