ok i got it put back together but its not starting i have no spark and its giving me a few codes 22coolent temp sensor, 14 map and24 tps all the sensors are plugged in and worked before. i think i may have some broken wires
ok i got it put back together but its not starting i have no spark and its giving me a few codes 22coolent temp sensor, 14 map and24 tps all the sensors are plugged in and worked before. i think i may have some broken wires
Check your grounds too.Originally Posted by shad0w2.s_tur80
If it's not a ground issue like Cordes said, the next thing I would check would be the +5v supply to the sensors because all those codes are the result of the voltage being higher or lower than expected. The voltage would be lower or nonexistent if the wire for the +5v sensor feed is broken.
ok the grounds are good and the 5v power supply is good im kinda thinking i have a bad hep. i swaped it out with another one and it almost fired im guessing that i have 2 bad ones im about to go get another one to try
Reply With Quote
