Hey, I just bought an Auto Meter electric fuel pressure gauge for my Rampage and i have a few questions on how to install it. http://www.autometer.com/cat_gaugede...id=2822&sid=15 It came with a 1/8" NPT sendor and i was wondering where and how i should install it on the fuel line? Could i just put a brass T between the fuel rail and FPR line are would the brass tee restrict the fuel flow back to the tank? Also is their any places that sell a good selection of brass fittings?
Thanks
Could i just make a brass fitting like this and put it on the rubber fuel line between the FRP and fuel rail?? http://www.stealth316.com/2-fp_install.htm
Or just do this-
AND DON'T USE THE RETURN LINE, you won't the proper pressure reading.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Thanks for the pic! so i put the brass T on the pressure line closest to the fuel rail, right? Will the brass T cause any kind of restriction?
Yep, and NO.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Posting Permissions
Reply With Quote
