Results 1 to 2 of 2

Thread: AEM wideband reads stoich 24/7

  1. #1
    Banned Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Windsor, Ont CANADA
    Posts
    3,805

    AEM wideband reads stoich 24/7

    so yet another problem....a few days ago after coming back home from a few hour drive, the wideband is reading stoich at ALL times.....accel, decel, idle, WOT....but it was working fine earlier that day.

    it just sits there at like 14.5 and blurps to 14.7 or 14.9, and about every 4 seconds, it jumps up an additional 1.0 afr to 15.7 then backs down to reading 14s.

    is the sensor toast? or just it need to be recalibrated?? its only got about 5-600 miles on it
    wideband is grounded with the monster tach on a 12 guage wire, and they are each powered seperately through the fuse box.

  2. #2
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: AEM wideband reads stoich 24/7

    I'd try recalibrating it, otherwise it could be a bad sensor,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Similar Threads

  1. Trouble staying Stoich (Blueberry cal)
    By bn880 in forum EFI Tuning
    Replies: 1
    Last Post: 09-25-2006, 11:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •