WTB A Bunch of Stuff
I'm building up a T2 Omni w/'88 electronics, and am looking for a specific list of parts.
If you have anything here that will help, send me a pm with info.
-Forged pistons
-Stainless oil/coolant lines
-adjustable AFPR
-Newer Omni/Horizon axels
-Intercooler piping, silcone connectors, t-bolts
-Talon/Eclipse 1G blow off valve
-Wideband AF
All items will be shipped to 55426, Minnesota.
Thanks.
Last edited by anokabball24; 10-04-2008 at 12:12 AM.
I have a crushed and modded Talon BOV, I can have a rebuilt garret done in a couple weeks. PM if interested.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
I have a small NPR IC, if you are interested let me know
I have five 2.5" 90 Degree Mandrel bends in 304 stainless.
I also have four 2.5" silicone couplers.
80 shipped for all of them.
I have a set of good used +20's and a socketed SMEC logic board. Killer deal at $125. + shipping for all. Mileage unknown on injectors but they worked good when I took them out of my car.
i have a coquest tsi fmic for $55 shipped.
2.2 or 2.5?
I will be using a 2.2 from an '88 Shelby Z. Being that, I have all the T2 parts, now I'm just looking to add some go fast parts.
I have a set of intercooler piping silicone couplers and T bolts I'll give you for $150 There are 22 Tbolts and 12 couplers. and a ton of piping. pm me if youre interested
Still looking for stuff. PM me if you have anything on this list.
ARP main studs will be shipped out tomorrow morning.
later Dick Westerhof
I have some ARP main studs for pre common block! new in box
a stock TII clutch with performance PP
3 bar maps
Juggy -
Got some studs, no longer going 3-bar, and have a clutch coming from TU.
Thanks though.
what all else do you need? i may be parting an 87 T2 shelby z. need a T2 engine, 2 pc intake, 555, etc?
Right now I just need a wideband, BOV, AFPR, and some axels from a 1990 automatic Omni.
the only thing i have off that list is a bosch bov with a nice k&n filter and a coupler sleeve on it. $25 shipped if you want it.
Posting Permissions
Reply With Quote