40% injectors and mopar computer?

[adubaz7]

I just bought an 89 lebaron turbo 5spd. The guy I bought it from told me that it had a mopar computer and 40% injectors How do I tell if this is true are there any markings or any other way to tell

[Mopar318]

There is a part number on the injectors.

[jl93sundance]

There should also be a part number on computer also.

[turbovanman²]

Get the number off the injector and go here but no stock MP computer is setup for +40's and rarely +20's. Like I said before, if this is true, your way over fueled.

http://www.turbo-mopar.com/forums/vb...e&articleid=20

http://www.turbo-mopar.com/forums/vb...e&articleid=68

[TopDollar69]

The Mopar S60 computer is set for +40 injectors. If you remove the computer and open the case, remove the top power module computer, and then get the 3 digit code off of the chip in the lower LH corner of the bottom board. The chip is inside the rubberized coating but you should be able to read the numbers. The numbers on the chip are the last 3 digits of the computer part number, and we should be able to figure out what it is from that.

[turbovanman²]

The Mopar S60 computer is set for +40 injectors. If you remove the computer and open the case, remove the top power module computer, and then get the 3 digit code off of the chip in the lower LH corner of the bottom board. The chip is inside the rubberized coating but you should be able to read the numbers. The numbers on the chip are the last 3 digits of the computer part number, and we should be able to figure out what it is from that.

Oops, good catch, forgot about that one,