Keep in mind the AEM wont read below 10:1 AFR. So it could be even richer.Originally Posted by Dave
Right now we're battling with a fueling issue. You hit 2psi and the A/F plummets to 10.0:1...
Keep in mind the AEM wont read below 10:1 AFR. So it could be even richer.
Right now we're battling with a fueling issue. You hit 2psi and the A/F plummets to 10.0:1...
Yes, but past that point it appears as dashes: --.-
Okay got it running right. Turns out the new ECT was bad as well. The alky pump decided it would come back to life all of a sudden... So as it sits now with 15psi and a combo of 16GPH of water/meth it rips the rubber off 1st gear. Keep in mind with an auto and a T04e I don't hit full boost until 30mph.
So we cleaned it up some more, put on a K&N filter. Right now it's down getting a new axle, axle seal, I redid the oil drain gasket, oh and the starter caught on fire.Pics of that one later.
I should have it running today after work. Once I do, Simon and Corby better watch out.
Sorry for the lack of attention here guys. Not much has been going on since winter.
We have started construction of the 215 CU intake plenum
The Type-H BOV (we finally got the new BOV in, it's a real SSQV so it better hold some pressure this time
We also just installed a FWD Performance Stage 5 chip tune and a 3bar MAP sensor. Maybe we can finally turn the boost up enough and not run out of fuel.
The intake manifold is being built at my buddy's machine shop. We also bought a little something extra too.All this should be going in by late Feb early March.
Just wrap that in carbon fiber mat and high temp resin
Whats your goals again?
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
To go faster than 11.76.
Sweetness complete!Just wrap that in carbon fiber mat and high temp resin
Yeah right, like a Minivan could ever run 11.76To go faster than 11.76.
Sweetness complete!
Your intake is screaming for an old fire extinguisher weld on mod
A local guy did away with the window roll up mechanisms inside the doors and just had old seat belt material with a couple snaps riveted in to raise/lower the windows. I thought it was pretty damn cool and he took 30 lbs from each door
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Ala Hemi A bodies?Yeah right, like a Minivan could ever run 11.76
Your intake is screaming for an old fire extinguisher weld on mod
A local guy did away with the window roll up mechanisms inside the doors and just had old seat belt material with a couple snaps riveted in to raise/lower the windows. I thought it was pretty damn cool and he took 30 lbs from each door
Exactly what I was thinking.Ala Hemi A bodies?
They can but you need a cage to go faster, I for one aren't willing to put a cage in, so thats my limit, or go as fast as possible and get kicked out,Yeah right, like a Minivan could ever run 11.76
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
The Mini Van is going to Columbus the 1st Saturday in April to get a 6 point roll cage installed, and the fuel cell with braided steel lines and an fitting stay tuned for pictures
Chuck
Aw C'mon Simon, so far *no* track official has even mentioned the 'C' word to youThey can but you need a cage to go faster, I for one aren't willing to put a cage in, so thats my limit, or go as fast as possible and get kicked out,
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Not yet,Aw C'mon Simon, so far *no* track official has even mentioned the 'C' word to you
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
You guys still planning on buying that long tube divided header from me?
I would love it. That's up to pops...I think we could take it and modify the collector and bring the compressor slightly out of the hood.
If you wanted to do that, might as well cut the #3 primary and add some length in it by making a little long radius bend in it. That would equal all the runners out to dead nuts nearly. Then I'd have zero complaints with the piece.I would love it. That's up to pops...
Tell him to pick it up. I'll even hook you guys up on shipping. I need some extra cash and motiviation. If it's gone then I HAVE to build a new one!
Sweet.If you wanted to do that, might as well cut the #3 primary and add some length in it by making a little long radius bend in it. That would equal all the runners out to dead nuts nearly. Then I'd have zero complaints with the piece.
Tell him to pick it up. I'll even hook you guys up on shipping. I need some extra cash and motiviation. If it's gone then I HAVE to build a new one!I'm leaning on him hard about it. I think it would be badass to atleast have it mounted up front instead of in the back where no one can see it.
Bring that crap farfegnugen boy!To go faster than 11.76.
Posting Permissions
Reply With Quote
