swirl head, ported manifolds, ffv injectors, vac block, +

[jamesmonty]

Sold! Thanks all!



James Montgomery
Morrow, Ohio (just north of cincinnati)
$250 + shipping
PM or e-mail for faster responce

Selling the top end I put together for my old daytona. Stock swirl head off a 90 daytona Shelby T1 auto (roller cam). Moparzrule ported 1 piece intake and exhaust manifolds. Stock fuel rail and reg with ffv injectors (painted black with all new o-rings), injector harness included. Misc stuff- one piece gasket VC with new gasket and fresh black paint (paint is not the best but looks ok), fwd performance allen head vc bolts, new manifold gasket, new exhaust manifold studs from fwd, new stock type plugs, stock tb but missing tp sensor (intake ported for 52mm), 6 port vac block (6 1/4"npt holes with 3/8" npt on each end) with some fittings. Currently it is all put together, $250 plus shipping from 45152. Uploading some picts right now will post soon. E-mail or PM if interested. And before you ask, not interested in parting it out just yet. And sorry I don't have a turbo to go with it.


Here are the picts-

[jamesmonty]

Bump!

[1966 dart wagon]

looks like a great deal, since just the ported intake costs what...110 bucks now. Good luck, great deal if you ask me but i dont have the money

[mario03SRT]

Someone buy Monty's sheite!

[jamesmonty]

Someone buy Monty's sheite!

Don't you think it would look good on that new short block of yours? But it! Would consider letting you have the t2 Garrett 2.5 sv, large wg can turbo I have that needs rebuilt. Would be a nice upgrade to you white car.

[moparzrule]

I will confirm that I did indeed port an intake and exhaust manifold for James.

[Mike_Shepard]

James if you get no interest and start parting I want the Vac block

[jamesmonty]

Sold! Thanks.