What is your name: Ronald Brumberg
What is your Email Address: r_brumberg@hotmail.com
What is your phone: 814-715-1703
What is your City: Summerville
What is your State: PA
What is your Zip code: 15864
1985 PLYMOUTH HORIZON
1P3BM18C1FD163114
HATCHBACK 4 DR
2.2L L4 2BL / FRONT WHEEL DRIVE
The car is a 2.2 carb/auto car. I bought it off ebay about 2 or 3 years ago. The previous owner was an elderly woman. She had taken it to her local garage for an inspection. They replaced a rotted timing belt and the water pump. Shortly there after, the headgasket went. I bought it off ebay with the intentions of replacing it and using it as a daily driver. Ambitions and funds went elsewhere, so the car as pretty much sat for the past couple years. I did disassemble the top end and have the head decked. The cylinder head is currently bolted back to the block, the rest of the top end would need assembled. From sitting with the head off, the cylinder bores and cam have some slight rust on them.
This is northeastern US and it is an l-body, so there is some undercarriage rust. It is shown in the photos. The front corners are rusted through. A couple spots on the front floor pan by the unibody rails is rusted. But on the upside, the spare tire well is in awesome shape, and the spare tire has never been used, lol.
Photos can be found here
http://smg.photobucket.com/albums/v116/brummy/horizon/
Just to clarify, this car is not currently running and hasn't in a couple years. Plan on some motor work, either bolting all back together, or (the best option) pulling the motor for a quick hone and such.
I can send a copy of the carfax. It shows a clean record with me registering it with 54k miles. I believe the mileage to be accurate.
Asking $400 obo. The car wouldn't need to be moved immediately, but would prefer within 60 days of purchase.
If its of any interest, I have an 89 T1 engine harness and computer. I would have to talk it over, but I maybe able to include a T1 top end and a413.
Reply With Quote
