I have a 1992 Dodge Daytona IROC originally a V6 but is now getting a 2.5 turbo swapped in- I have the correct computer (SBEC-II) and wiring harness from a '92 2.5 turbo car.
The 2.5 turbo is coming from a donor '89 Chrysler Lebaron (SMEC), of which I have the entire car for parts (engine, trans, wiring, etc).
After getting things mostly swapped, I am now realizing that the Fuel Injector Harness is not compatible. As you can imagine, finding an injector harness for a '92 is nearly impossible...
I would like to adapt the existing '89 harness to work with the '92 SBEC-2 computer...I do not mind using the old SMEC style connectors to make it physically connect, but I need to know what changes need to be made to the harness itself for this to function correctly...
Any advice or diagrams would be greatly appreciated!