hi all, i have a 782 swirl to put on my 2.2 n/a but i need a cam and my buddy has one from a turbo 2.5 with the right teeth to match the crank (block is casted 89) but im wondering if thers a difference from turbo and n/a cams? thanks.
hi all, i have a 782 swirl to put on my 2.2 n/a but i need a cam and my buddy has one from a turbo 2.5 with the right teeth to match the crank (block is casted 89) but im wondering if thers a difference from turbo and n/a cams? thanks.
There is a difference. The TBI cams have more lift and duration, also a bit more overlap.
so i should try and stick with a tbi one?
If your running low boost, IE under 20 psi, give the TBI cam a try.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
forgot to say that it is a tbi engine
Yes, run the TBI cam.
Reply With Quote
